Motorola HDT101 ユーザーズマニュアル
38
TROUBLESHOOTING
Before calling your service provider, review this troubleshooting section.
This information will help you quickly solve a problem. If your problem
still exists, contact your service provider.
This information will help you quickly solve a problem. If your problem
still exists, contact your service provider.
Problem Possible
Solution
The
POWER
LED on
the front panel does
not light up
not light up
Confirm the power cord is plugged into a functioning
power outlet.
power outlet.
Press
POWER
on the front panel to see if the LED lights
up.
Determine if the HDT101 is in “standby” mode by
pressing
pressing
STANDBY
on the remote control.
No picture
Verify that all cables are connected properly
(hand-tighten if necessary).
(hand-tighten if necessary).
If you are watching TV using your VCR, be sure your
VCR is on.
VCR is on.
Verify that the TV is directed to the proper input
source.
source.
Poor picture
quality
quality
Verify that all cables are connected properly
(hand-tighten if necessary).
(hand-tighten if necessary).
Check the antenna and make sure it is aligned to the
correct direction.
correct direction.
Check the signal’s strength and quality. Press
INFO
to
display the i-Banner and review the color bars at the
bottom of the window. If any of the bars are red, adjust
your antenna and try again.
bottom of the window. If any of the bars are red, adjust
your antenna and try again.
No sound
Confirm that your HDT101’s and TV’s volume settings
are properly set and not in "mute" mode.
are properly set and not in "mute" mode.
Verify that all cables are connected properly
(hand-tighten if necessary).
(hand-tighten if necessary).
Scan the channel again. Press
MENU
to display the
on-screen menu and select Installation > Manual
Scan.
Scan.