Omron NE- C801KD ユーザーズマニュアル
16
4. Cleaning and daily disinfecting
4.1
Cleaning
Following the cleaning instructions after each use will prevent any remaining medication in
the tank from drying, resulting in the device not nebulising effectively and also for preventing
the tank from drying, resulting in the device not nebulising effectively and also for preventing
infections.
Warning:
Thoroughly rinse the nebuliser kit, kids accessory, mask or mouthpiece with clean hot tap water
after each use, and disinfect them after the last treatment of the day.
after each use, and disinfect them after the last treatment of the day.
1.
Make sure that the power switch is in the off (
) position.
2.
Disconnect the AC adapter from the wall outlet and the compressor.
3.
Remove the nebuliser kit from the air tube and disassemble the nebuliser kit. Refer
to Section 2 (page 12-13).
to Section 2 (page 12-13).
4.
Discard any remaining medication in the medication tank.
5.
Wash all the nebulising parts in warm water and mild detergent and rinse in clean
hot tap water.
hot tap water.
6.
After cleaning and disinfecting the parts, rinse
them thoroughly with clean water and allow the
parts to air dry in a clean environment.
them thoroughly with clean water and allow the
parts to air dry in a clean environment.
Note: Do not start operation before the cleaned parts
are completely dried.
7.
If the compressor or the outside of the air tube are
dirty, wipe them clean with a soft cloth moistened
with water or mild detergent.
dirty, wipe them clean with a soft cloth moistened
with water or mild detergent.
Caution:
The compressor is not waterproof.
8.
Reassemble the nebuliser kit. Put it in the storage bag.
Mild
D
ete
rge
nt
Care and maintenance
NE-C801S-KDE_A_M_main.book Page 16 Friday, January 13, 2012 4:43 PM