Harmar Mobility CPL1400 ユーザーズマニュアル

 
 

 

 
 
 
Installing the Outer Guard Panels 

 
Step 1 
Remove the hexbolts on the corners of the 
platform. Insert the guard panel posts into 
the pockets in the platform.  The smooth side 
of the guard panels should face in towards 
the center of the platform. 

 

 
If you have a 90 degree exit platform, install 
the end guard panel using the provided 
bracket and bolt to inner guard panel. 
 
 
 
 
 
 
 
 
 
Step 2 
Install the platform control box on the rear 
guard panel using screws and nuts through 
the panel. 

 

 
 

Step 3 
Plug in the harness for the platform control 
box. Secure the harnesses under the clip on 
top of the carriage flange. 

• Position the ramp after the lift is in its final 
location. 
• Maintain a gap of 3/8” to 3/4” between the 
ramp and platform. 
• Drill a pilot hole into the concrete and 
fasten using supplied concrete lags through 
ramp flanges.