Panasonic NV-HS880 ユーザーズマニュアル
21
VCR display:
For automatic change of the brightness of
the VCR display when the VCR is switched
off.
the VCR display when the VCR is switched
off.
• Set the brightness of the VCR display as follows:
[ON]:
Indications are brightly lit.
[OFF]:
Indications are not lit.
[DIMMED]:
Indications are dimly lit.
AV2:
To select the type of external source
equipment which is connected to the VCR’s
AV2 21-pin socket.
equipment which is connected to the VCR’s
AV2 21-pin socket.
• Set the external source equipment as follows:
[DECODER]:
When a decoder is connected.
[EXT LINK 1]:
When a digital receiver which transmits a special
control signal recordings via the 21-pin Scart
cable, for example the F.U.N. receiver
(TU-DSF30/S3) is connected for the linked timer
recordings. (See page 13.)
control signal recordings via the 21-pin Scart
cable, for example the F.U.N. receiver
(TU-DSF30/S3) is connected for the linked timer
recordings. (See page 13.)
[EXT LINK 2]:
When an external equipment with a timer function
is connected for the linked timer recordings.
(See page 13.)
is connected for the linked timer recordings.
(See page 13.)
[EXT]:
When another VCR or a satellite receiver is
connected.
connected.
S-VHS:
To make an S-VHS recording on a S-VHS
cassette. (See page 11.)
cassette. (See page 11.)
• Set the S-VHS switch as follows:
[ON]:
To record in S-VHS format on S-VHS cassette.
[OFF]:
To record in VHS format on S-VHS cassette.
S-VHS ET:
To record a VHS cassette with S-VHS
Quality. This format is only possible in the
SP mode. (See page 11.)
Quality. This format is only possible in the
SP mode. (See page 11.)
• Set the S-VHS ET switch as follows:
[ON]:
To record in S-VHS ET format on VHS cassette.
[OFF]:
To record in VHS format on VHS cassette.
Illumination:
To light the front illumination strip when the
VCR is on. (For NV-HS880 Series)
VCR is on. (For NV-HS880 Series)
• Set the lighting of the front illumination strip as follows:
[ON]:
The front illumination strip is lit when the VCR is
on.
on.
[OFF]:
The front illumination strip is not lit when the VCR
is on.
is on.
TV system:
To select the type of colour TV system to be
used during playback or during recording
from an external source.
used during playback or during recording
from an external source.
• Set the colour TV system as follows:
[AUTO]:
The VCR automatically distinguishes PAL,
SECAM/MESECAM system. If the picture lacks
colour, set to [PAL] or [MESECAM].
SECAM/MESECAM system. If the picture lacks
colour, set to [PAL] or [MESECAM].
[PAL]:
When PAL system is used.
[MESECAM]:
When SECAM system is used.
Picture:
To set the playback picture sharpness
(sharper or softer). (For NV-HS880 Series)
(sharper or softer). (For NV-HS880 Series)
• Adjust the picture sharpness as follows:
[AUTO]:
To select sutomatic sharpness adjustment of the
playback picture.
playback picture.
[SHARP]:
To make the playback picture sharper.
[SOFT]:
To make the playback picture softer.
Audio playback: To set the Audio mode to be used during
playback. (For NV-HS880 Series)
• Set Audio mode as follows:
[NORMAL]:
Normally set to this position.
[MIX]:
Use this setting when playing back a cassette
tape on which audio dubbing has been
performed. The Hi-Fi sound track with the original
sound and the normal sound track (mono) with
the audio-dubbed sound are played back
together.
tape on which audio dubbing has been
performed. The Hi-Fi sound track with the original
sound and the normal sound track (mono) with
the audio-dubbed sound are played back
together.
Remote:
To set the Remote control mode.
(For NV-HS880 Series)
(For NV-HS880 Series)
• Set the Remote control mode as follows:
[VCR 1]:
Select this setting on both the VCR and the
remote control for normal use with one VCR.
remote control for normal use with one VCR.
[VCR 2]:
Select this setting on both the VCR and the
remote control when using this VCR and another
Panasonic VCR in the same place. This ensures
that you can operate both VCRs independently
with their respective remote control. It also allows
you to operate both VCRs with a single remote
control, simply by changing the remote control
mode on the remote control.
remote control when using this VCR and another
Panasonic VCR in the same place. This ensures
that you can operate both VCRs independently
with their respective remote control. It also allows
you to operate both VCRs with a single remote
control, simply by changing the remote control
mode on the remote control.
• To change the remote control mode on the remote control itself,
change the position of the [VCR 1/2]
(16) to match the setting. If
these settings are not matched, the remote control cannot be used
to operate the VCR.
to operate the VCR.
4) Press the [OK]
(24) to conclude the setting.
(Press it twice on the Remote control setting.)
5) Press the [EXIT]
(27) to exit the On Screen Display.
Language or Country Setting
1) Press the [MENU]
(7) to display
the Main menu on the TV
screen.
screen.
2) Press the [Cursor]
34 to
select [Other settings]. Press the
[OK]
[OK]
(24) to display Other
settings menu.
3) Press the [Cursor]
3421
to select [Language] or [Country]
and the entry field for [Language]
or [Country] in this order.
and the entry field for [Language]
or [Country] in this order.
4) Press the [Cursor]
34 to
select the desired language or
country.
country.
5) Press the [OK]
(24) to conclude the setting.
6) Press the [EXIT]
(27) to exit the On Screen Display.
TV system
Picture
Audio playback
Remote
Language
Country
Picture
Audio playback
Remote
Language
Country
: AUTO
: AUTO
: NORMAL
: VCR 1
: English
: others
: AUTO
: NORMAL
: VCR 1
: English
: others
Other settings
Panasonic VCR
2/2
NV-HS830 Series
Tape length
OSD
Power save
VCR display
AV2
S-VHS
S-VHS ET
TV system
Language
Country
OSD
Power save
VCR display
AV2
S-VHS
S-VHS ET
TV system
Language
Country
: AUTO (2 E-240)
: 4:3
: OFF
: DIMMED
: DECODER
: ON
: OFF
: AUTO
: English
: others
: 4:3
: OFF
: DIMMED
: DECODER
: ON
: OFF
: AUTO
: English
: others
Other settings
Panasonic VCR
NV-HS880 Series