Philips VR550/58 ユーザーズマニュアル
Preparation for use
This chapter shows you how to prepare the video
recorder for use. The video recorder automatically
seeks out and stores all available TV channels.
recorder for use. The video recorder automatically
seeks out and stores all available TV channels.
1.
1.
Select the desired language for the on-screen
menu by pressing
menu by pressing
or
.
2.
2.
Press .
3.
3.
Confirm with
.
The automatic TV channel search starts.
4.
4.
The clock setting display appears on the TV
screen.
screen.
5.
5.
Set the time with the number buttons
.
6.
6.
Set 'DAY', 'MONTH' and 'YEAR' with the
number buttons
number buttons
.
7.
7.
When all information is correct, save by
pressing .
pressing .
The preparation for use is now complete.
Decoder allocation
Some TV channels transmit encoded TV signals
which can only be viewed with a purchased or
rented decoder. You can connect such a decoder
to this video recorder. The following function will
automatically activate the connected decoder for
the desired TV channel.
which can only be viewed with a purchased or
rented decoder. You can connect such a decoder
to this video recorder. The following function will
automatically activate the connected decoder for
the desired TV channel.
1.
1.
Switch the TV on. If applicable, select the
programme number for the video recorder
operation.
programme number for the video recorder
operation.
2.
2.
Use
or
to select the pro-
gramme number which you would like to allo-
cate the decoder to.
cate the decoder to.
3.
3.
Press
. The main menu will appear.
4.
4.
Use or to
select
'TUNER
SET UP'. Then press
.
5.
5.
Use or to
select
'MANU-
AL TUNING'. Then press
.
6.
6.
Use or to
select
'DECODER'.
7.
7.
Use
to select 'ON'
(Decoder switched on).
8.
8.
To end, press
.
The decoder has now been allocated to this
programme number.
STATUS/EXIT
FWD 1- B
STOP C-L
PLAY B-K
FWD 1- B
STOP C - L
PLAY B - K
FWD 1- B
STOP C - L
PLAY B - K
MENU
0..9
P–
P+
STATUS/EXIT
0..9
0..9
P+
MENU
STOP
C
-L
PLAY B-K
EN
'Aim' correctly
In the following sections, you require the remote
control for the first time. When using, always
aim the front of the remote control at the video
recorder and not at the TV.
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
In the following sections, you require the remote
control for the first time. When using, always
aim the front of the remote control at the video
recorder and not at the TV.
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
PLEASE WAIT
START
FINISH
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
The video recorder does not find any TV
channels during the search
channels during the search
• Select channel 1 on the TV. Can you see the
saved TV channel on the TV?
If not, check the cable connection of the aerial
(aerial socket), video recorder, TV.
If not, check the cable connection of the aerial
(aerial socket), video recorder, TV.
• The video recorder searches the entire frequency
range in order to find and save the largest possi-
ble number of TV channels. It is possible that the
TV channels in your country are broadcast in a
higher frequency range. As soon as this range is
reached during the search, the video recorder will
find the TV channels.
ble number of TV channels. It is possible that the
TV channels in your country are broadcast in a
higher frequency range. As soon as this range is
reached during the search, the video recorder will
find the TV channels.
TIME --:--
DATE --/--/--
END=EXIT
2. Installing your video recorder
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
MANUAL TUNING
PROG.
P55
CHANNEL
055
→DECODER
[OFF]
SKIP
[OFF]
VIDEO MODE
[SECAM]
SELECT K L CHOOSE B
END=EXIT
END=EXIT
How can I switch off the decoder?
Use
Use
to select 'OFF' (Decoder
switched off).
FWD 1- B
4
HG474ED(EN).qx3 03.12.22 9:58 PM Page 4