Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Philips
  4. VR388-55
  5. ユーザーズマニュアル

Philips VR388-55 ユーザーズマニュアル

ダウンロード
ページ / 20
— 17 —
3
Select Channel
Press 
CH
 
5 or ∞ to
enter the TV channel.
• To record from
external line input,
press 
CH
 
5 or ∞
until “A/V REAR” or “A/V FRONT”
appears on the TV screen.
4
Select Start Time
Press 
START + 
or
 –
(Number button 
1
 or
4
).
• Each time you press
the button, the set
time changes by 1-minute intervals. If
you hold the button, the set time changes
by 30-minute intervals.
5
Select Stop Time
Press 
STOP + 
or
 –
(Number button 
2
 or
5
).
• Each time you press
the button, the set
time changes by 1-minute intervals. If
you hold the button, the set time changes
by 30-minute intervals.
6
Select Tape Speed
Press 
SPEED
.
• Each time you press
the button, the tape
speed alternates
between “LP” and
“SP.”
7
Select Start Date
Press 
DATE + 
or
 –
(Number button 
3
 or
6
).
• The year and day of
the week is displayed
automatically.
Tracking Adjustments
Auto tracking
Each time a tape is inserted, auto
tracking starts working and
continuously analyses the signal to
adjust for optimum picture quality
during playback. So, there is no need
for you to minimize noises in most
tapes during playback.
Manual tracking
• During normal playback:
If auto tracking cannot eliminate
noises well during playback, press
CHANNEL
 
5 or ∞.
• During a slow motion picture:
Press 
CHANNEL
 
5 or ∞ to
minimize noises in the slow motion
picture.
• During a still picture:
Press 
CHANNEL
 
5 or ∞ to reduce
jitter in the still picture.
To cancel manual tracking, stop the
tape, eject the tape, then re-insert it.
Timer Recording
To record while you’re away, follow
step 1 — 10 below.  For each
programme you set, the VCR will turn
on, start recording, and turn off
automatically. You can store up to 8
programmes.
Make sure....
• The clock is set to the correct time
before setting timer recording.
• A cassette is inserted in the VCR and
the record tab of the cassette must
not be removed.
FOR EACH STEP BELOW, YOU
NEED TO FINISH WITHIN 60
SECONDS; OTHERWISE,
PROGRAMMING WILL HAVE TO
BE RESTARTED FROM STEP 1.
1
Select Timer Mode
Press 
TIMER
.
The Timer Recording
menu appears.
2
Select Programme mode
1 Press 
5 or ∞ to
select “QUICK
PROGRAM-
MING” then press
3/
OK
.
The Quick Programming menu
appears.
• If you have already made 8 pro-
grammes, “ALL PROGRAMS IN
USE” appears and goes back to the
Timer Recording menu. If this
happens, delete unwanted programmes
(✈P.18).
To be continued on the next page
SELECT            CHOOSE    /OK
         QUICK PROGRAMMING
         PROGRAM  REVIEW
 
   
TO END PUSH EXIT
ONE TIME PROGRAM
   PROGRAM     1
   CHANNEL+/–   
   START +/–      – –:– –  
   STOP +/–        – –:– –  
   REC SPEED   SP
   DATE +/–        – –/– –/– –
                          
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
– –    
ONE TIME PROGRAM
   PROGRAM     1
   CHANNEL+/–   
   START +/–      – –:– –  
   STOP +/–        – –:– –  
   REC SPEED   SP
   DATE +/–        – –/– –/– –
                          
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
12    
ONE TIME PROGRAM
   PROGRAM     1
   CHANNEL+/–   
   START +/–      08 : 30  
   STOP +/–        – –:– –  
   REC SPEED   SP
   DATE +/–        – –/– –/– –
                          
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
12    
ONE TIME PROGRAM
   PROGRAM     1
   CHANNEL+/–   
   START +/–      08 : 30  
   STOP +/–        09 : 30  
   REC SPEED   SP
   DATE +/–        – –/– –/– –
                          
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
12    
ONE TIME PROGRAM
   PROGRAM     1
   CHANNEL+/–   
   START +/–      08 : 30  
   STOP +/–        09 : 30  
   REC SPEED   LP
   DATE +/–        – –/– –/– –
                          
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
12    
ONE TIME PROGRAM
   PROGRAM     1
   CHANNEL+/–   
   START +/–      08 : 30  
   STOP +/–        09 : 30  
   REC SPEED   LP
   DATE +/–        07/04/98
                           FRIDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
12    
VR388/588-55 EN (N)
6/1/99, 9:04 AM
17