Philips VR870CC/L/P/07 ユーザーズマニュアル
41
Problems and solutions for programmed
recordings
recordings
PROBLEM
SOLUTION
The video recorder
does not react
does not react
b
While a programmed recording is being made, you cannot operate your video recorder manually.
If you want to cancel the programmed recording, press STANDBY/ON m .
If you want to cancel the programmed recording, press STANDBY/ON m .
'
k
' will flash in the
video recorder display
b
The video recorder was switched on several minutes before the start of a programmed recording.
Switch off the video recorder with STANDBY/ON m . A programmed recording (timer) will
only function if the video recorder is switched off.
Switch off the video recorder with STANDBY/ON m . A programmed recording (timer) will
only function if the video recorder is switched off.
b
No cassette was inserted. Insert a cassette and switch off the video recorder using
STANDBY/ON m .
Cassette is ejected
during recording
during recording
b
The end of the tape was reached during recording.
The '
PROT' error
message appears
briefly in the display
then the cassette is
ejected
briefly in the display
then the cassette is
ejected
b
A cassette was inserted with the security tab removed. Undo the erase protection (chapter
'Manual Recording', section 'Preventing accidental erasing of cassettes') or insert a different
cassette.
'Manual Recording', section 'Preventing accidental erasing of cassettes') or insert a different
cassette.
Error message: '
FULL'
b
If this error message appears after pressing TIMER k , then all TIMER blocks are already
programmed. No more recordings can be programmed. If you want to clear or check a
programmed recording (TIMER block), select it with P ;q or P =r .
programmed. No more recordings can be programmed. If you want to clear or check a
programmed recording (TIMER block), select it with P ;q or P =r .
ENGLISH
Programming a recording (TIMER)