Philips VRA670AT ユーザーズマニュアル
VCR PLUS+ PROG.
PLUS CODE : – – – – – – – –
TO END PUSH EXIT
2
Press the VCR PLUS+/ENTER button.
3
Press the Number buttons to enter the PlusCode pro-
gramming number of the program you wish to record.
Then, press the VCR PLUS+/ENTER button.
gramming number of the program you wish to record.
Then, press the VCR PLUS+/ENTER button.
VCR PLUS+ PROG.
PLUS CODE : 13285 – – –
TO SET PUSH VCR+
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
a ONCE, DAILY, or WEEKLY recording. Then, press the
F.FWD/B button.
a ONCE, DAILY, or WEEKLY recording. Then, press the
F.FWD/B button.
●
ONCE: The VCR will record a TV program on any day you
choose, up to 12 months away.
choose, up to 12 months away.
●
DAILY: The VCR will record the same channel every day from
Monday to Friday – starting at the same time and recording for
the same length of time.
Monday to Friday – starting at the same time and recording for
the same length of time.
●
WEEKLY: The VCR will record the same channel on the same
day, at the same time, and for the same length of time every
week.
day, at the same time, and for the same length of time every
week.
• CODE ERROR may flash on the
screen after step 3 if you enter an
incorrect PlusCode programming
number (for example, one that is too
short). The previous screen will
appear. Enter the correct PlusCode
programming number.
incorrect PlusCode programming
number (for example, one that is too
short). The previous screen will
appear. Enter the correct PlusCode
programming number.
• If CLASH flashes on the screen after
step 3, the timer recording you just
programmed and another timer
recording overlap. The current timer
recording will not occur.
programmed and another timer
recording overlap. The current timer
recording will not occur.
• If you select DAILY at step 4,
ERROR may flash on the screen if
the program you want to record is
broadcast on a Saturday or Sunday.
the program you want to record is
broadcast on a Saturday or Sunday.
• If the VCR PLUS+ CROSS REF. MAP
reappears after step 3, the VCR
PLUS + channel number for the
recording you entered was higher
than 99. In this case, enter the cor-
rect CABLE/TV channel in the map.
Then, press the MENU button and
continue from step 4.
PLUS + channel number for the
recording you entered was higher
than 99. In this case, enter the cor-
rect CABLE/TV channel in the map.
Then, press the MENU button and
continue from step 4.
Helpful Hints
VCR PLUS+ PROG.
→
ONCE
DAILY
WEEKLY
DAILY
WEEKLY
SELECT op CHOOSE B
TO END PUSH EXIT
TO END PUSH EXIT
1
Press the VCR button.
VAR.SLOW
VCR
TV
CBL/DBS
VOL.
CH.
MUTE
ALT.CH
3
6
9
0
2
5
8
1
4
7
TRACKING
F.ADV
VCR/TV
REC/OTR
POWER
SPEED
STATUS/EXIT
STOP
PLAY
F.FWD
REW
MEMORY
X2 PLAY
SLOW
VCR PLUS+
/ENTER
QUICK
TIME
INDEX
SEARCH
REC END
SKIP
EJECT
MENU
CLEAR
PAUSE/STILL
4
1
3
2
40 Timer Recording with the VCR Plus+ Programming System
Follow these steps to set a timer recording with the PlusCode
programming numbers in your TV guide. Before you begin:
programming numbers in your TV guide. Before you begin:
●
Set up the channels at the VCR (page 12).
●
Set up the VCR Plus+ and Cable/TV channel numbers (pages
38-39).
38-39).
●
Set the clock (pages 15-18).
●
Put a tape in the VCR.
●
Make sure the VCR light appears on the display panel. If it does
not, press the VCR/TV button once.
not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.