Philips VRX360AT ユーザーズマニュアル
TO SELECT PUSH NO. SHOWN
1 ON SCREEN ON ON
2 COUNTER ONLY
3 ON SCREEN OFF
2 COUNTER ONLY
3 ON SCREEN OFF
TO END PUSH EXIT
22 On-Screen Status Displays
• If the channel you select has no
broadcast, the screen will become
solid blue. The screen will remain
blue until you select an active chan-
nel.
solid blue. The screen will remain
blue until you select an active chan-
nel.
• You may bring up the status display
at any time by pressing the STA-
TUS/EXIT button.
(The exception is when viewing a
still picture or a slow motion picture,
or when F.FWD or REW(ind) is
pressed during playback.)
TUS/EXIT button.
(The exception is when viewing a
still picture or a slow motion picture,
or when F.FWD or REW(ind) is
pressed during playback.)
• Channel numbers (when tuned) are
displayed for a few seconds.
Helpful Hints
1
Press the VCR button, then the MENU button to bring up
the main menu display.
the main menu display.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
TO END PUSH EXIT
A status display, which includes the current time, channel, and other
information (see illustration) will appear when you press the STA-
TUS/EXIT button or certain function buttons. The contents of the sta-
tus display may vary. There are three status display modes:
ON SCREEN ON:
information (see illustration) will appear when you press the STA-
TUS/EXIT button or certain function buttons. The contents of the sta-
tus display may vary. There are three status display modes:
ON SCREEN ON:
●
When you press the STOP button or the PLAY button, the status
display appears for five seconds.
display appears for five seconds.
COUNTER ONLY:
●
When you press the STOP button or the PLAY button, the status
display appears for five seconds. After five seconds, only the
counter will remain on-screen. Press the STATUS/EXIT button to
remove it.
display appears for five seconds. After five seconds, only the
counter will remain on-screen. Press the STATUS/EXIT button to
remove it.
ON SCREEN OFF:
●
The status display will not appear when you press function buttons.
●
You must press the STATUS/EXIT button to see the status display.
To select a status display mode, follow the steps below.
2
Press the Number 2 button to select VCR SET UP.
TO SELECT PUSH NO. SHOWN
1 REPEAT PLAY OFF
2 ON SCREEN MODE
3 AUDIO OUT
4 LANGUAGE
5 VCR PLUS+ REF. MAP
2 ON SCREEN MODE
3 AUDIO OUT
4 LANGUAGE
5 VCR PLUS+ REF. MAP
TO END PUSH EXIT
3
Press the Number 2 button to select ON SCREEN MODE.
4
Press the Number 1 button to select ON SCREEN ON, the
Number 2 button to select COUNTER ONLY, or the
Number 3 button to select ON SCREEN OFF. ON will appear
beside the selected status display mode.
Number 2 button to select COUNTER ONLY, or the
Number 3 button to select ON SCREEN OFF. ON will appear
beside the selected status display mode.
5
Press the STATUS/EXIT button to exit.
STOP
12:00 AM
TV STEREO
CH10
STEREO
2ND AUD
SLP
M 1:23:45
HIFI
Function
Button
Pressed
Button
Pressed
Time Channel
Counter
and
Counter
Memory
and
Counter
Memory
Tape
Speed
Speed
MTS
Broadcast
Available
Broadcast
Available
Audio
Out
Mode
Out
Mode
Receiving and
Recording Mode
Recording Mode