Philips VRX360AT ユーザーズマニュアル
One Touch Recording 29
Starting an OTR
1
Press the VCR button, then the CHANNEL (Up/Down)
buttons or the Number buttons to select the channel you
want to record.
buttons or the Number buttons to select the channel you
want to record.
OTR (0:30)
CH12
2
Press the REC(ord)/OTR button repeatedly until the desired
recording length (30 minutes to eight hours) appears in the upper
left corner of the screen. Recording will begin immediately. The
REC light and the Timer light will appear on the display panel.
recording length (30 minutes to eight hours) appears in the upper
left corner of the screen. Recording will begin immediately. The
REC light and the Timer light will appear on the display panel.
The one touch recording (OTR) function allows you to set an
immediate timed recording 30 minutes to eight hours long with-
out setting the timer. Before you begin, make sure:
immediate timed recording 30 minutes to eight hours long with-
out setting the timer. Before you begin, make sure:
●
Channels are programmed.
●
The desired recording speed (SP, LP, SLP) has been selected
with the (Tape) SPEED button. (Details are on pages 32 and
50.)
with the (Tape) SPEED button. (Details are on pages 32 and
50.)
●
There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
intact and the tape is long enough to record the program(s).
●
The VCR light appears on the display panel of the VCR. (If it
does not, press the VCR/TV button once.)
does not, press the VCR/TV button once.)
3
To stop an OTR before recording is finished, press the
STOP button or the POWER button. To cancel the OTR but
continue recording, press the REC(ord)/OTR button until REC
appears in the upper left corner of the screen. The REC light will
remain on the display panel of the VCR, but the Timer light will
disappear.
STOP button or the POWER button. To cancel the OTR but
continue recording, press the REC(ord)/OTR button until REC
appears in the upper left corner of the screen. The REC light will
remain on the display panel of the VCR, but the Timer light will
disappear.
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
press the STATUS/EXIT button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired length appears on-screen.
the REC(ord)/OTR button until the
desired length appears on-screen.
• If you begin an OTR when a record-
ing is paused, the OTR will begin.
• You can not pause recording (for
example, during commercials) dur-
ing an OTR.
ing an OTR.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority.
the OTR has priority.
• If the end of the tape is reached
during an OTR, recording will stop.
The VCR will eject the tape, then
turn itself off.
The VCR will eject the tape, then
turn itself off.
Helpful Hints
3
1
2
REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY
SLOW
PAUSE/STILL
MENU
CLEAR
EJECT
STOP
F.FWD
–
+
1
2
3
4
5
6
7
8
9
0
+100