Radio Shack 62 (16-632) ユーザーズマニュアル

24

• If you leave the VCR in the freeze-frame

mode for 3 minutes, the VCR stops playing
the tape to protect the video heads.

• To reduce or eliminate jitter in the freeze-

frame picture, press and hold 

s or 

 t

until the picture is clear.

During freeze-frame, you can advance the pic-
ture one frame at a time by repeatedly pressing

. This feature works best with video cas-

settes recorded at the SP or EP speed. Press

 to return to normal playback.

To start slow motion playback, while a tape is
playing, press 

. Press 

 again or

 to return to normal playback. During slow

motion, the sound is muted and the picture
quality is lower than during normal playback.
Slow motion picture quality is best with tapes
recorded at the SP or EP speed.

• If you leave the VCR in the slow-motion

mode for 3 minutes, the VCR stops playing
the tape to protect the video heads.

• If the slow-motion picture is poor, press

and hold 

s or 

 t until the picture

improves.

You can skip over unwanted material on the re-
corded tape, such as commercials. Press

 during playback. The VCR fast for-

wards over the next minute of recording, then
resumes normal playback.

Your VCR’s counter shows how long a tape
has been running. To have the counter display
on the TV screen, press 

 on the re-

mote control.

The counter does not reset if you eject a tape
then put in a new tape. To reset the counter to

, press 

.

Note:  The real-time counter might stop if you
fast-forward or rewind through a blank section
on the tape. This is normal.

You can reset the counter to 

 at any

position on the tape and then return to that po-
sition. This lets you quickly return to a selected
place on the tape later.

Follow these steps to use the zero search func-
tion.

1. While a tape is playing, if the counter does

not appear on the TV screen, press

 once to display it.

2. Within 5 seconds, press 

again at the location you want to return to
later. The counter resets to 

.

3. When you want to return to the selected

location, stop the tape, then press 

. The tape rewinds or fast-forwards

and automatically stops when it reaches

.

• If you press 

to rewind the tape past

, the time appears with a minus

(–) sign.

• The counter does not work with blank

tapes or blank portions of partially
recorded tapes.

16-549.fm  Page 24  Tuesday, July 20, 1999  5:04 PM