Radio Shack 66 ユーザーズマニュアル
21
7. When the VCR finishes scanning and stor-
ing channels, it searches for an EDS signal
and shows:
and shows:
It can take up to 10 minutes for the VCR to
set the clock using the EDS signal. If the
VCR finds a signal, it automatically sets its
clock to the correct time, and
set the clock using the EDS signal. If the
VCR finds a signal, it automatically sets its
clock to the correct time, and
AUTO
CLOCK
SET
COMPLETED
appears.
If the VCR does not detect a signal within this
time,
time,
AUTO
CLOCK
SET
INCOMPLETE
appears. There is probably not an EDS sig-
nal available in your area. Press
nal available in your area. Press
MENU/
ACTION
, then see “Manually Setting the
Clock” on Page 19 to set the clock.
Turning On Auto Clock Set
If you turned off the auto clock set feature and
manually set the VCR’s clock, then find that
EDS is available in your area, you can turn the
auto clock set feature back on. This ensures
that the VCR automatically sets itself to the
correct time after a power failure of less than
24 hours.
manually set the VCR’s clock, then find that
EDS is available in your area, you can turn the
auto clock set feature back on. This ensures
that the VCR automatically sets itself to the
correct time after a power failure of less than
24 hours.
Follow these steps to turn on auto clock set.
1. Press
MENU/ACTION
to display the main
menu.
2. Repeatedly press
or
to highlight
SET
CLOCK
, then press
.
3. If necessary, press
or
to highlight
AUTO
CLOCK
SET
, then press
.
4. Press
CH
s
. The VCR searches for an EDS
signal and, if it finds one, automatically
sets its clock to the correct time. If the VCR
does not find an EDS signal, follow the
steps under “Manually Setting the Clock”
on Page 19.
sets its clock to the correct time. If the VCR
does not find an EDS signal, follow the
steps under “Manually Setting the Clock”
on Page 19.
AUTO CLOCK SET
PROCEEDING
CANCEL: PUSH STOP KEY
Setting the Cable Box
When you change the connections to your
VCR (for example, when you subscribe to a ca-
ble company’s service), follow these steps to
change the antenna system settings.
VCR (for example, when you subscribe to a ca-
ble company’s service), follow these steps to
change the antenna system settings.
1. Press
MENU/ACTION
to display the main
menu.
2. Repeatedly press
or
to highlight
SET
UP
CHANNEL
, then press
. You
see:
3. Be sure
CABLE
appears next to
ANTENNA
. If not, repeatedly press
or
to highlight
ANTENNA
, then press
to select
CABLE
.
4. Repeatedly press
or
to highlight
CABLE/DSS
BOX
SET
UP
and press
.
You see:
5. If necessary, repeatedly press
or
on
the remote control to highlight
CABLE/DSS
BOX
VCR
TV
. Then press
.
The display prompts you to select the
cable box’s output channel number.
Repeatedly press
cable box’s output channel number.
Repeatedly press
CH
s or t to select the
number, then press
.
6. Follow Steps 5–8 under “Setting the On-
Screen Language/Connection Type/
Remote Code/Clock” on Page 14.
Remote Code/Clock” on Page 14.
7. When you finish, press
MENU/ACTION
twice.
SET UP
T UP
Y
KEY
ANNEL
- - - -
Y
KEY
X VCR TV
S BOX TV
16-635.fm Page 21 Wednesday, July 21, 1999 9:03 AM