Radio Shack 66 ユーザーズマニュアル

26

To watch a broadcast using the TV’s tuner, turn
off the VCR or repeatedly press 

 until

VCR disappears.

Note: If you are using a TV/monitor connected
to the VCR’s 

 jacks, be

sure to set the TV/monitor to its TV mode.

The antenna or cable signals pass through the
VCR unaffected, as if the antenna or cable
were connected directly to the TV. Use the TV
as you normally would.

Your VCR can receive up to 68 VHF and UHF
channels, and up to 125 cable channels. The
VCR displays the channels as 1–125.

• Channels 2–13 are the same for VHF and

cable TV, and cable companies usually
number them as they appear on the dis-
play.

• Since cable companies sometimes desig-

nate cable channels with letters or letter-
number combinations, a channel number
you see on the VCR’s display might differ
from the channel number displayed on
your cable box. You might need to experi-
ment to determine the proper cable chan-
nel designations for your cable system. For
more information, contact your local cable
company.

• Two cable channels are designated for

audio only.

1. Turn on the TV and set it to the same chan-

nel as the VCR’s 

 switch.

Note: If you are using a TV/monitor con-
nected to the VCR’s 

jacks, set the TV/monitor to its video mode.

2. Repeatedly press 

 until VCR

appears.

3. To manually select a channel, you can

press 

s or t to have the tuner automati-

cally advance to the next channel stored in
the tuner’s memory.

Note: If you press 

 s when the tuner is

at the highest programmed channel or 

 t

when the tuner is at the lowest pro-
grammed channel, the VCR enters the
audio/video mode and 

 or 

appears on the TV (see “Selecting the Sig-
nal to Record” on Page 39). Continue to
press 

 s or t until the highest or lowest

programmed channel appears.

Or, to directly select a channel, press the
number buttons on the remote control for
the desired channel.

• Precede a single-digit number with a 0

— for example, 01, 02, and so on.

• To enter a three-digit number, press 

,

then enter the second and third digits in
the channel number.

• If you want to receive MTS stereo or SAP

broadcasts, see “Receiving/Recording
Stereo/SAP Broadcasts” on Page 39.

You can assign call letters (such as ABC or
CBS) to a channel so the call letters appear
with the channel number on the TV when you
select the channel. You can select from the
VCR’s 24 preset call letter combinations and
create up to 10 call letter combinations of your
own.

16-635.fm  Page 26  Wednesday, July 21, 1999  9:03 AM