Philips SV2000 ユーザーズマニュアル

Tape cannot be removed.
•  Make sure the power plug is completely connected to an AC (alternating current) outlet.
•  You have set a timer recording. Turn on the VCR power, then eject the tape. Be sure to insert a tape

and turn off the VCR for your timer recording.

Tape cannot be inserted.
•  Insert the tape, window side up, with the record tab facing you.
•  Make sure a tape isn’t already in the VCR by pressing the STOP/EJECT button on the VCR or the EJECT

button on the remote control.

•  Gently push on the center of the tape when putting it in the VCR. Never force the tape into the VCR.
•  If a timer recording is set, the VCR will not accept a tape that does not have a record tab. You may only

insert a tape with the record tab intact. 

VCR ejects the tape when the RECORD button is pressed or when the VCR power is turned
off to set a timer recording.
•  Make sure the tape has a record tab. Details are on page five.

There is no playback picture, or the playback picture is noisy or contains streaks.
•  Make sure the TV is on the same channel as the VCR’s CH3/CH4 switch. Details are on page seven.
•  Make sure the VCR is in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV

button once.)

•  Make sure channel 3 or 4 is properly adjusted.
•  Adjust the tracking. Details are on page 41.

TV programs cannot be watched normally.
•  Press the VCR/TV button to put the VCR in TV position. (The VCR/TV light will disappear.)
•  Check the connections between the VCR, TV, antenna/cable, and Cable Box/DBS (if applicable). Details

The reception on all channels is poor.
•  You may need to tune your TV again.

Line Input
•  If you accidentally enter Line Input mode (AUX will appear on your TV screen briefly), press the CHAN-

NEL (o/p) buttons or use the Number buttons to select another channel.

SVZ142.comb  4/7/99 6:30 PM  Page 43