Radio Shack 65 ユーザーズマニュアル
27
4. Press
. You see:
5. Repeatedly press
or
to highlight
C/A
RECORD
, then press
to select
ON
or
OFF
.
ON
— With this setting, when you press
STOP
to end a recording, the VCR asks
you if you want it to mark commercials
when you stop recording or turn the VCR
off.
when you stop recording or turn the VCR
off.
OFF
— The VCR does not mark commer-
cials.
6. When you finish setting up Commercial
Advance, press
MENU/ACTION
twice.
Notes:
• When recording ends, it takes several min-
utes for the VCR to mark the recording.
• The VCR marks commercials in a timer
recording after the recording stops (see
“Automatic Timer Recording” on Page 35).
“Automatic Timer Recording” on Page 35).
• If the interval between two timer recordings
is not long enough to allow commercial
marking, the VCR waits until after the next
timer recording.
marking, the VCR waits until after the next
timer recording.
• The VCR can store up to eight timer
recording settings and 45 commercial loca-
tions in memory at one time. When the
memory becomes full, the remaining com-
mercials are not marked.
tions in memory at one time. When the
memory becomes full, the remaining com-
mercials are not marked.
• The Commercial Advance feature setting
returns to
OFF
if there is a power failure.
• If you rewind the tape and start another
recording before power is turned off, com-
mercials might not be correctly marked.
mercials might not be correctly marked.
Selecting a Commercial Advance
Tape Playback Option
Tape Playback Option
Follow these steps to select how the VCR op-
erates when you play any marked tape.
erates when you play any marked tape.
1. Press
MENU/ACTION
to display the main
menu.
2. Repeatedly press
or
to highlight
SET
UP
FEATURE
, then press
.
3. Repeatedly press
or
to highlight
SET
UP
COMMERCIAL
ADV.
, then
press .
4. Repeatedly press
or
to highlight
C/A
PLAYBACK
, then press
to select
AUTO
or
MANUAL
.
AUTO
— The VCR automatically skips
marked commercial blocks.
MANUAL
— The VCR skips commercials
only when you press
C/A SKIP/ZERO
during
playback.
5. When you finish, press
MENU/ACTION
three times to exit.
Questions and Answers about
Commercial Advance
Commercial Advance
Questions and Answers about Commercial Ad-
vance
vance
SET UP COMMERC I AL ADV.
C / A RECORD
: ON
C / A PLAYBACK : AUTO
SET : KEY
SELECT : KEY
END : ACT I ON KEY
Question
Answer
How fast does the
VCR advance through
commercials?
VCR advance through
commercials?
The VCR advances
through 3 minutes of
commercials in about
8 to 12 seconds if the
tape speed is SLP
(see “Recording
Speeds/Tape Selec-
tion” on Page 33). If it
is SP, it takes about
25 to 35 seconds.
through 3 minutes of
commercials in about
8 to 12 seconds if the
tape speed is SLP
(see “Recording
Speeds/Tape Selec-
tion” on Page 33). If it
is SP, it takes about
25 to 35 seconds.
Are commercials still
recorded on the tape?
recorded on the tape?
Yes.
16-634.fm Page 27 Tuesday, July 20, 1999 5:37 PM