Toshiba D-VR17KB ユーザーズマニュアル

ページ / 83
EN
72
Playback
1
Press [
 
ON / STANDBY] to turn on 
the unit.
To play back a tape, turn on the TV and be sure to 
select the input to which the unit is connected.
2
Press [VCR].
3
Insert a pre-recorded tape, then 
press [PLAY 
P] to begin playback.
4
During playback, press [PAUSE 
p].
Playback will be paused and sound will be muted.
5
Press [PLAY 
P] to resume playback.
6
Press [STOP 
S] to stop playback.
7
Press [OPEN / CLOSE 
O] to eject the 
tape.
Note
• When a tape without record tab is inserted, the unit 
will start playback automatically.
• Tracking will be automatically adjusted upon 
playback. To adjust the tracking manually, press 
[PROG.  
/ ].
Recording and One-touch Timer 
Recording (OTR)
Basic Recording
Before recording, make sure:
• The desired channel is selected by pressing 
[the Number buttons] or [PROG.  
/ ] on the 
remote control.
• There is a tape with a record tab in the unit.
• Refer to page 33 for instructions on timer recording.
1
Turn on the unit and insert a 
recordable tape.
Make sure that the TV input is set on the unit.
2
Press [VCR].
3
Select the recording mode using 
[REC MODE].
• The desired recording mode is selected in SP 
(standard play) or LP (long play) mode by 
pressing [REC MODE].
4
Select the desired channel to record 
using [PROG. 
 
/
 
] or 
[the Number buttons].
5
Press [REC I] to start recording.
To temporarily stop recording or to resume it, 
press [PAUSE 
p]. 
After the unit has been in pause mode for 5 
minutes, it will stop automatically to protect the 
tape and the video head from damage.
6
Press [STOP 
S] when the recording 
is completed.
VCR Functions
VCR
VCR
Tape speed
Recording / Playback Time
Type of tape
E60
E120
E180
E240
SP mode
1 hour
2 hours
3 hours
4 hours
LP mode
2 hours
4 hours
6 hours
8 hours
VCR
VCR
E9GA0BD_EN.book  Page 72  Monday, March 26, 2007  10:14 AM