Philips SVZ162 ユーザーズマニュアル
42 MTS Broadcast Stereo System
Your VCR can play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound
from two sources. Your VCR also can play tapes recorded in a second audio (usually, that means your
program is recorded in a second language). Of course, your VCR will play tapes recorded in monaural
(single-source) sound as well.
from two sources. Your VCR also can play tapes recorded in a second audio (usually, that means your
program is recorded in a second language). Of course, your VCR will play tapes recorded in monaural
(single-source) sound as well.
Your VCR also will record in Hi-Fi stereo or in second audio, so when you play back that tape on the
VCR, it will be in stereo or second audio. If you play back the tape on a VCR that can’t play back tapes in
stereo or second audio, the VCR will automatically play the tape in monaural sound.
VCR, it will be in stereo or second audio. If you play back the tape on a VCR that can’t play back tapes in
stereo or second audio, the VCR will automatically play the tape in monaural sound.
Read the directions on this page to familiarize yourself with your VCR’s stereo and second audio setups.
Then follow the directions on page 43 to record in stereo or second audio and the directions on page 44
to play back tapes recorded in Hi-Fi stereo.
Then follow the directions on page 43 to record in stereo or second audio and the directions on page 44
to play back tapes recorded in Hi-Fi stereo.
Understanding On-Screen Displays
When you receive a signal from a channel you’re watching, portions of the on-screen display shown below
will appear when you press the DISPLAY button on the remote control.
will appear when you press the DISPLAY button on the remote control.
The indication SAP or STEREO that appears on this side of the status display
tells you if the program you’re watching is available in second audio or stereo.
Even though a program is available in second audio or stereo, you still must
program the VCR to receive or record the program. Follow the directions on
page 43. This indication is not available during tape playback.
tells you if the program you’re watching is available in second audio or stereo.
Even though a program is available in second audio or stereo, you still must
program the VCR to receive or record the program. Follow the directions on
page 43. This indication is not available during tape playback.
STOP
12:00 AM
CH 02
STEREO
SAP
SAP
SLP
1:23:45
HIFI
To record and play back programs broadcast in stereo, even if you have a Mono Speaker TV, just use one
of the connections shown, then follow the steps on pages 43-44.
of the connections shown, then follow the steps on pages 43-44.
CH3
CH4
OUT
IN
ANT
R
L
VIDEO
IN
OUT
IN
OUT
AUDIO
Stereo Amplifier
or Receiver
Monitor
TV
Mono
Speaker TV
Stereo
Speaker TV
OR
R
L
For stereo sound, connect the audio cables
to the AUDIO OUT Jacks on the VCR and
to the AUDIO IN Jacks on the Stereo
Amplifier or Receiver. Then, connect the
video cable to the VIDEO OUT Jack of the
VCR and to the VIDEO IN Jack of a moni-
tor TV.
to the AUDIO OUT Jacks on the VCR and
to the AUDIO IN Jacks on the Stereo
Amplifier or Receiver. Then, connect the
video cable to the VIDEO OUT Jack of the
VCR and to the VIDEO IN Jack of a moni-
tor TV.
OR, for monaural sound, connect only
the RF coaxial cable (supplied) to the
VCR’s OUT Jack and to the TV’s
ANTENNA IN Jack.
SVZ162 LAYOUT 4/7/99 6:42 PM Page 42