Hitachi VT-FX530A ユーザーズマニュアル

 

45

 

No power 

• Make sure the VCR is plugged into an AC outlet. 

Remote control doesn't 
work 

• Make sure the batteries are fresh, and properly 
installed. 

Won't record 

• Safety tab has been removed from cassette (VCR 
will 
  automatically eject the tape). 

Won't play back 

• Make sure the TV/VCR switch is set to the VCR 
mode. 
• Make sure the TV is set to the VCR channel (3 or 
4) or AUX (if 
  using direct audio/video hookup). 

Won't make timer 
recordings 

• The VCR power must be turned off to activate 
timer recording. 
• Clock is not set correctly. 
• Programs entered incorrectly. 
• Programs exceed the length of the cassette. Use 
the EP 
  recording speed for maximum programming. 
• Safety tab has been removed from cassette. 

Snowy picture in playback

• Snow or picture noise is normal during search, 
still, and slow 
  Playback. 
• Head cleaning may be required. 
• Tape is worn or of inferior quality - adjust tracking 
controls. 

Snowy picture in normal 
TV viewing 

• Check antenna or cable connections. 

Clock shows --:-- on the 
TV display. 

• Power has been interrupted - reset the clock. 
• Reset the clock. 

Erratic VCR display 

• Push the reset switch with a sharp pointed 
instrument (pen, toothpick, etc.). 
                                   

 

 

•

 Maintenance 

Regular periodic maintenance is required to maintain optimum VCR performance. Such maintenance and 
adjustments should not be attempted by the user. Please consult your service dealer for further information. 

NOTE: Dirt accumulation on the video heads will cause the playback picture to become noisy.  The VCR may 
require the video heads to be professionally cleaned by a qualified service dealer.