JVC 0203-AH-CR-LG ユーザーズマニュアル
January 31, 2003 6:13 pm
Page 5
— 5 —
Master Page: Right
A
Check contents
Make sure the package contains all of the accessories listed in
“Specifications” (
“Specifications” (
墌
16).
B
Situate recorder
Place the recorder on a stable, horizontal surface.
C
Connect recorder to TV
RF Connection
A
Disconnect the TV aerial cable from the TV.
B
Connect the TV aerial cable to the AERIAL connector on the
rear of the recorder.
C
Connect the provided RF cable between the RF. OUT
connector on the rear of the recorder and the TV’s aerial
connector.
connector.
AV Connection
If your TV is equipped with a 21-pin SCART connector, perform
AV connection to improve picture quality during tape playback.
AV connection to improve picture quality during tape playback.
A
Connect the aerial, recorder and TV as shown in the
illustration.
B
Connect an optional 21-pin SCART cable between the EURO
AV1 AUDIO/VIDEO connector on the rear of the recorder and the
TV’s 21-pin SCART connector.
TV’s 21-pin SCART connector.
Icon
Description
F ABC OSD
Select this icon to set the language. You can
select among 7 languages. (
select among 7 languages. (
墌
7)
G AUDIO
STEREO / LEFT / RIGHT / MONO
(HR-V505/V506/V507E only)
(HR-V505/V506/V507E only)
Your recorder is capable of recording four
soundtracks (STEREO, LEFT, RIGHT and
MONO) and plays back the one you select.
STEREO
soundtracks (STEREO, LEFT, RIGHT and
MONO) and plays back the one you select.
STEREO
: For Hi-Fi stereo tapes
LEFT
: For main audio of Bilingual tapes
RIGHT
: For sub audio of Bilingual tapes
MONO
: For audio-dubbed tapes
H OSD
ON / OFF
When this function is set to “ON”, various
recorder status information (on-screen display)
appears on the screen.
recorder status information (on-screen display)
appears on the screen.
NOTE:
When you use the recorder as the source player
for editing a tape, be sure to set this function to
OFF. Otherwise, the recorder status
information will be recorded on the edited tape.
I 16:9/4:3
AUTO / 16:9 / 4:3
You can select the aspect ratio of your TV.
AUTO
AUTO
: Normally select this. You can play back
the 16:9 and 4:3 screen-programme as they are.
16:9
16:9
: You can play back the programme with
the 16:9 screen format.
4:3
4:3
: You can play back the programme with the
4:3 screen format.
NOTE:
Set your TV to its AV mode if the picture is cut
off on the screen when you play back the
programme with the 16:9 screen format.
J DECODER ON / OFF
Set “DECODER” to “ON” when you use a
decoder connected to the EURO AV2
DECODER connector.
decoder connected to the EURO AV2
DECODER connector.
K EPC
OFF / SOFT / SHARP
This function helps you to adjust the playback
picture quality according to your preference.
OFF
picture quality according to your preference.
OFF
: Picture quality is not adjusted.
SOFT
: Reduces image coarseness when viewing
overplayed tapes containing much noise.
SHARP
SHARP
: Clearer, sharper-edged picture when
viewing images with much flat, same-coloured
surfaces such as cartoons.
surfaces such as cartoons.
NOTE:
You can perform EPC setting only during
playback.
L NIC
AUTO / OFF
(HR-V505/V506/V507E only)
(HR-V505/V506/V507E only)
Select the appropriate mode. Refer to page 11.
AUTO
AUTO
: The recorder detect NICAM broadcasts
automatically.
OFF
OFF
: The recorder does not detect NICAM
broadcasts.
Basic Connections
Aerial connector
Back of TV
21-pin SCART
connector
connector
TV aerial cable
RF cable
(provided)
21-pin SCART cable
(not provided)
(not provided)
Mains power cord
Mains outlet
Back of recorder
EURO AV1
AUDIO/VIDEO
AUDIO/VIDEO
RF. OUT
AERIAL
HR-V505_205E-001EN.fm Page 5 Friday, January 31, 2003 6:13 PM