A&D HW-60KGL ユーザーズマニュアル

HW-G Instruction Manual Page 19

HW-G OZIM v1a

7.2

Tare (and Net Display)

The “Tare” is used to cancel the mass of a container, receptacle, case, bag, etc.
which is put on the pan to contain the item to be weighed.
Caution
The tare reduces the available weighing range.
The current tare value is reset by pressing the  

7.2.1  Semi-Automatic Tare (Input by Weighing)

Step 1 Put the container onto the pan.

Step 2 Press the 

 TARE 

 switch. The display becomes zero and the net mark

is displayed.

Step 3 It is now possible to put something into the container and to read its

net display.

Step 4 Remove all items from the pan.

7.2.2  Preset Tare (Digital Input of Known Tare)

Step 1

Press and hold the  

SET

  switch and press the  

TARE

  switch.

Then the blank or stored tare value is displayed. This blank display
means that the tare value is zero (reset value) and 

blinks.

Step 2 Set the preset tare value by using the following switches.

 

^

 

 switch

selecting the value of a digit.

 

<

 

 switch

selecting a digit.

Step 3 Press the 

 ENTER 

 switch to store the new preset tare value.

The scale displays a net value i.e. the tare value subtracted from the
gross weight value.

Step 4 It is now possible to put something onto the pan and to read its net

weight.

Step 5 Remove all items from the pan.