Taylor TR250SS ユーザーズマニュアル
Instruction Manual
Stainless Steel
Heavy Duty
Receiving Scale
Capacity: 250lb x 1lb
Leading the Way in Accuracy®
TR250SS
Congratulations on your purchase of a Taylor®
Mechanical Receiving Scale. Your Taylor® scale is an
example of superior design and craftsmanship. Please
read this instruction manual carefully before use. Keep
these instructions handy for future reference.
Mechanical Receiving Scale. Your Taylor® scale is an
example of superior design and craftsmanship. Please
read this instruction manual carefully before use. Keep
these instructions handy for future reference.
1. Place the scale on a hard, level surface.
2. Allow the scale to reach room temperature before
2. Allow the scale to reach room temperature before
use.
3. Place a weight on the scale and allow the pointer to
come to rest.
4. Remove the weight and allow the pointer to come to
rest.
5. Repeat this cycle two or three times. Remove the
weight from the platform. Adjust the pointer to zero
using the adjustment dial on the right side of the
scale.
using the adjustment dial on the right side of the
scale.
6. If the scale is relocated or bumped during weighing,
a readjustment to zero may be required. To do so,
repeat the above steps. When weighing, evenly
distribute weight on the platform.
repeat the above steps. When weighing, evenly
distribute weight on the platform.
7. Place a weight on the platform. Wait a few seconds
for the dial to come to rest. If the dial window is not
visible, press down on the “PRESS TO LOCK” lever
visible, press down on the “PRESS TO LOCK” lever
located under the dial window. This will lock the dial
in place, so when the item is removed, the pointer
will still indicate the weight.
will still indicate the weight.
8. Pull up the “PRESS TO LOCK” lever to release the
dial for the next weighing.
1. The body and the mechanism are not dishwasher
safe. Immersing the scale in water may trap liquid
between the lens and the body that can not be
effectively dried out. This damage will void the
warranty.
between the lens and the body that can not be
effectively dried out. This damage will void the
warranty.
2. An occasional cleaning of exposed parts with a soft,
slightly damp cloth will keep your Taylor® scale
clean and attractive. To remove stains, use a mild
soap. Never use detergents, excess water, treated
cloths, harsh cleaning agents, or sprays. Your
Taylor® scale does not require oiling or lubrication
of any kind.
clean and attractive. To remove stains, use a mild
soap. Never use detergents, excess water, treated
cloths, harsh cleaning agents, or sprays. Your
Taylor® scale does not require oiling or lubrication
of any kind.
3. Do not tamper with the scale's internal components.
Doing so will invalidate the warranty on this scale
and may cause damage. The scale contains no user-
serviceable parts.
and may cause damage. The scale contains no user-
serviceable parts.
General Operation
General Operation Continued
Care and Maintenance
One Year Limited Warranty
Taylor Precision Products
2220 Entrada Del Sol
Las Cruces, New Mexico 88001 USA
Customer Service Phone: 1-800-225-4834
Customer Service Fax: 1-575-526-4347
www.taylorusa.com
There are no expressed warranties except as listed above.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
©2012 Taylor Precision Products, Inc. and its affiliated companies, all rights
reserved. Taylor® and Leading the Way in Accuracy® are trademarks of
Taylor Precision Products, Inc. and its affiliated companies. All rights
reserved.
reserved. Taylor® and Leading the Way in Accuracy® are trademarks of
Taylor Precision Products, Inc. and its affiliated companies. All rights
reserved.
Made to our exact specifications in China.
NOT LEGAL FOR TRADE
This product is warranted against defects in materials or
workmanship for one (1) year from date of original purchase
for the original purchaser. It does not cover damages or
wear resulting from accident, misuse, abuse, or
unauthorized adjustment and/or repair. Should this product
require service (or replacement at our option) while under
warranty, please pack the item carefully and return it
prepaid, along with receipt showing date of purchase and a
note explaining reason for return to:
workmanship for one (1) year from date of original purchase
for the original purchaser. It does not cover damages or
wear resulting from accident, misuse, abuse, or
unauthorized adjustment and/or repair. Should this product
require service (or replacement at our option) while under
warranty, please pack the item carefully and return it
prepaid, along with receipt showing date of purchase and a
note explaining reason for return to:
TR250SS 1.12R2
1
H
/