Microsoft MP C3500 ユーザーズマニュアル

Adding paper, Toner and Staples

96

❒ When performing the auto color calibration from the copy function, press

 under Copier Function. When performing from the printer function,

press [Start] under Printer Function.

❒ The test pattern will not be read if it is set in the ADF.
❒ When performing the auto color calibration from the printer function, se-

lect test patterns from [600 × 600 dpi], [1800 × 600 dpi] and [2400 × 600 dpi] and
then press [Start Printing].

❒ The test pattern will be printed on an A4K, 8

1

/

2

”× 11”K size page (If

A4K is not available then A3 L, B4 JISL will be used.). Make sure to
check the paper set in the paper tray.

❒ Set the test pattern in the following way:

❒ When the ADF is installed, make sure to set the test pattern on the expo-

sure glass, and then 2 or 3 white sheets, same size as the test pattern, above
the test pattern.

GCCLCPIE