Microsoft MP C3500 ユーザーズマニュアル
When You Cannot Make Clear Copies
23
2
When You Cannot Make Clear Copies
This section explains likely causes of and possible solutions for unclear copies.
Problem
Cause
Solution
Copies appear dirty.
Image density is too high. Adjust the image density. See “Adjust-
ing Copy Image Density”, Copy/Docu-
ment Server Reference.
ment Server Reference.
Copies appear dirty.
Auto Image Density is
not selected.
not selected.
Adjust the auto density. See “Adjusting
Copy Image Density”, Copy/Docu-
ment Server Reference.
Copy Image Density”, Copy/Docu-
ment Server Reference.
The reverse side of an
original image is copied.
original image is copied.
Image density is too high. Adjust the image density. See “Adjust-
ing Copy Image Density”, Copy/Docu-
ment Server Reference.
ment Server Reference.
The reverse side of an
original image is copied.
original image is copied.
Auto Image Density is
not selected.
not selected.
Adjust the auto density. See “Adjusting
Copy Image Density”, Copy/Docu-
ment Server Reference.
Copy Image Density”, Copy/Docu-
ment Server Reference.
A shadow appears on
copies if you use pasted
originals.
copies if you use pasted
originals.
Image density is too high. Adjust the image density. See “Adjust-
ing Copy Image Density”, Copy/Docu-
ment Server Reference.
ment Server Reference.
Change the orientation of the original.
Put mending tape on the pasted part.
The same copy area is
dirty whenever making
copies.
dirty whenever making
copies.
The exposure glass, scan-
ning glass, or ADF is dirty.
ning glass, or ADF is dirty.
The same copy area is
dirty whenever making
copies.
dirty whenever making
copies.
The original that has
already been printed is
scanned.
already been printed is
scanned.
Select [Generation Copy], and then begin
copying. See “Generation Copy”,
Copy/Document Server Reference.
copying. See “Generation Copy”,
Copy/Document Server Reference.
Copies are too light.
Image density is too light. Adjust the image density. See “Adjust-
ing Copy Image Density”, Copy/Docu-
ment Server Reference.
ment Server Reference.
Copies are too light.
A light copy may result
when you use damp or
rough grain paper.
when you use damp or
rough grain paper.
Use the recommended paper. also, use
paper that has been stored in the rec-
ommended temperature and humidity
condition. See “Copy Paper”, About
This Machine.
paper that has been stored in the rec-
ommended temperature and humidity
condition. See “Copy Paper”, About
This Machine.
Contact your service representative.
Copies are too light.
Toner cartridge is almost
empty.
empty.
Add toner. See p.89 “Adding Toner”.
Parts of images are not
copied.
copied.
The original is not set cor-
rectly.
rectly.
Set originals correctly. See “Placing
Originals”, Copy/Document Server
Reference.
Originals”, Copy/Document Server
Reference.
Parts of images are not
copied.
copied.
The correct paper size is
not selected.
not selected.
Select the proper paper size.