Motorola WT4070 ユーザーズマニュアル
2 - 18 WT4070/90 Wearable Terminal User Guide
Waking the Wearable Terminal
The wake up conditions define what actions wake up the wearable terminal after it has gone into suspend
mode. The wearable terminal can go into suspend mode by either pressing the Power button or automatically
by control panel time-out settings. These settings are configurable and the factory default settings are shown in
mode. The wearable terminal can go into suspend mode by either pressing the Power button or automatically
by control panel time-out settings. These settings are configurable and the factory default settings are shown in
.
Table 2-9
Wakeup Default Settings
Condition for Wakeup
Power Button
Automatic Time-out
AC power is applied.
No
Yes
Wearable terminal is inserted into a cradle.
No
Yes
Wearable terminal is removed from a cradle.
No
Yes
Wearable terminal is connected to a serial device.
No
Yes
Wearable terminal is connected to a USB device.
No
Yes
Wearable terminal is disconnected from a USB
device.
device.
No
Yes
A key is pressed.
No
Yes
An attached scanner is triggered.
No
Yes
Wireless LAN activity is detected.
No
No
A headset is connected to the wearable terminal.
No
Yes
NOTE
If the battery is removed and replaced, the only way to wake up the terminal is by pressing the Power
button.
button.