Motorola WT4070 ユーザーズマニュアル

Maintenance & Troubleshooting

4 - 5

Wearable terminal amber 
Charge Status LED does not 
light when wearable terminal 
inserted.

Cradle is not receiving power. 

Ensure the power cable is connected 
securely to both the cradle and to AC power.

Wearable terminal is not 
correctly seated.

Remove and re-insert the wearable terminal 
into the cradle, ensuring it is correctly seated. 

Wearable terminal battery is 
not charging.

Wearable terminal was 
removed from cradle or cradle 
was unplugged from AC power 
too soon.

Ensure cradle is receiving power. Ensure the 
wearable terminal is seated correctly. If the 
wearable terminal battery is fully depleted, it 
can take up to four hours to fully recharge a 
Standard Battery and it can take up to six 
hours to fully recharge an Extended Life 
Battery.

Battery is faulty.

Verify that other batteries charge properly. If 
so, replace the faulty battery.

The wearable terminal is not 
fully seated in the cradle.

Remove and re-insert the wearable terminal 
into the cradle, ensuring it is correctly seated. 

During data communication, 
no data was transmitted, or 
transmitted data was 
incomplete.

Wearable terminal removed 
from cradle during 
communication.

Replace wearable terminal in cradle and 
retransmit.

Incorrect cable configuration.

See the system administrator or refer to the 
WT4090 Integrator Guide.

Ethernet connection error. Link 
LED is not lit (see 

). 

See the system administrator. Probable 
Ethernet connection error.

Wearable terminal’s main 
batteries not charging.

Ambient temperature of the 
cradle is too warm or too cold.

Move the cradle to an area where the 
ambient temperature is between 0 °C and 40 
°C (32 °F and 104 °F).