Motorola XPR 4300 ユーザーズマニュアル
Advanced Features
English
21
Utilities
Setting the Squelch Level
You can adjust your radio's squelch level to filter out unwanted
calls with low signal strength or channels that have a higher
than normal background noise.
calls with low signal strength or channels that have a higher
than normal background noise.
Settings: Normal is the default. Tight filters out (unwanted)
calls and/or background noise. However, calls from remote
locations may also be filtered out.
calls and/or background noise. However, calls from remote
locations may also be filtered out.
Procedure:
1
Press the preprogrammed Squelch button.
2
You hear a positive indicator tone, indicating the radio is
operating in tight squelch.
OR
You hear a negative indicator tone, indicating the radio is
operating in normal squelch.
operating in tight squelch.
OR
You hear a negative indicator tone, indicating the radio is
operating in normal squelch.
Setting the Power Level
You can customize your radio’s power setting to high or low for
each channel.
each channel.
Settings: High enables communication with radios located at a
considerable distance from you. Low enables communication
with radios in closer proximity.
considerable distance from you. Low enables communication
with radios in closer proximity.
Procedure:
1
Press the preprogrammed Power Level button.
2
You hear a positive indicator tone, indicating the radio is
transmitting at low power.
OR
You hear a negative indicator tone, indicating the radio is
transmitting at high power.
transmitting at low power.
OR
You hear a negative indicator tone, indicating the radio is
transmitting at high power.
Turning the Option Board Feature(s) On or Off
A channel can support up to 6 option board features. Refer to
your dealer or system administrator for more information.
your dealer or system administrator for more information.
Procedure:
Press the programmed Option Board Feature button to toggle
the feature on or off.
Press the programmed Option Board Feature button to toggle
the feature on or off.
Turning the Public Address System On or Off
You can enable and disable the radio’s internal public address
(PA) system.
(PA) system.
Procedure:
Press the programmed PA On/Off button to toggle the feature
on or off.
Press the programmed PA On/Off button to toggle the feature
on or off.
NAG_6880309T18-D.book Page 21 Friday, April 11, 2008 12:40 PM