Motorola I580 ユーザーズマニュアル

PREPARING FOR FIELD LEVEL TESTING:  Remove Flip Assembly

68P80401P05

Tools:  Black stick. NO metallic tools!

NOTE: i580 flip components include a Flex Connector ribbon which can be easily torn or 

damaged if not handled properly.  Handle the Flex Ribbon with care especially when 
working it through the front housing slot. 

1. Remove the keypad and main board from the front housing. Make sure the flip is in the open 

position. 

2. Remove the three T-4 screws securing the frame-flip center hinge.  Flip the unit over and lift the 

flip-center hinge straight up to remove.

3. Locate the slight gap between the right knuckle and flip assembly. Align the flat tip of the black 

stick with the gap. 

Figure 7-8.  

2

3