Motorola I580 ユーザーズマニュアル

FIELD LEVEL TEST MODES AND PROCEDURES:  Test Modes

68P80401P05

To perform field level testing on the i580 unit, you must enter a test mode to retrieve data from the 
unit, and perform the technician tests in the correct sequence with the appropriate equipment.

NOTE: All tests should be performed in an RF interference-free environment.

Test procedures are listed in the order in which they should be implemented. Each test contains a 
description of what it does and the type of equipment required (if any).

NOTE: The unit must be powered up and registered before performing most tests.

Some tests require that a certain mode be entered to conduct the test and/or retrieve data from the 
unit. The following test modes are used with the i580 unit:

•

Debug Mode/Trace Mode) 

•

Test Mode

NOTE: Do not enter these modes until unit registration has been completed.

Use this procedure to access Test Mode.

1. Power up the unit. Wait until registration is complete before continuing.

NOTE: Steps 2 through 7 must be performed quickly with no more than one second between 

each key press. (#, *, M, M, M, <, M, M, <)

2. Press 

.

3. Press 

.

4. Press Menu three times.
5. Press the left Scroll key.
6. Press Menu twice.
7. Press the left Scroll key. You now are in Test Mode.

To exit Test Mode, press the option key under Exit. The unit waits for a few seconds, resets, and 
then re-registers.