Motorola TK30 ユーザーズマニュアル

Installation

Before you begin

Only qualified personnel should install this car kit. 

Because of the wide variety of vehicle types and models, it 
may be necessary to contact the vehicle manufacturer for 
detailed installation information.

An air bag inflates with great force. Do not place 

objects, including communication equipment, in the area 
over the air bag or in the air bag deployment area. If the 
communication equipment is improperly installed and the 
air bag inflates, serious injury could occur. If needed, 
contact the vehicle manufacturer for air bag information 
specific to the vehicle.

Please follow these guidelines:

Mount components securely on strong surfaces to 
prevent shifting that could cause injury or interfere with 
safe vehicle operation. Use the supplied mounting 
hardware as needed.

Mounted components and attached wires or cables 
must not interfere with seating or leg space.

Route cables so they are protected from pinching, sharp 
edges and crushing. Keep all in-line connectors easily 
accessible.

The car kit is intended for use in 12 Volt negative ground 
systems only. The car kit draws less than 10 Amps. 
Confirm that the vehicle's electrical system can supply 
this current.

Install the vehicle integration kit

The vehicle integration kit is the central connection point 
for the car kit. Connections to the vehicle, microphone, 
audio input device, and user interface module (UIM) are 
made from the vehicle integration kit.

The vehicle integration kit should be secured to the vehicle 
after the rest of the car kit components are installed and 
cables are secured