Motorola G24 ユーザーズマニュアル
Chapter 3: AT Commands Reference
December 31, 2007
AT Commands Reference Manual
3-43
+MVC, Motorola Vocoders Configuration
This AT command is used to choose and configure the priority order of the supported voice
codecs (vocoders).
codecs (vocoders).
The phone will restart 10 seconds after the set command execution completed. Changes take
effect after restart.
effect after restart.
The following table shows the +MVC parameters.
Example
AT+MVC=0
OK
AT+MVC=1,1,3,5
OK
// Delay 10 sec. Restart.
AT+MVC?
+MVC: 1,2,3
OK
AT+MVC=?
+MVC: (0-1),(1-5), (1-5), (1-5), (1-5), (1-5)
OK
Command
Type
Syntax
Response/Action
Remarks
Set
AT+MVC=<n>[,<p1>[,<
p2>[,<p3>[,<p4>[,<p5>]
]]]]
]]]]
OK
or:
+CME ERROR: <err>
The command will save new vocoders
configuration or restore the default
configuration, wait 10 sec and restart
the phone.
configuration or restore the default
configuration, wait 10 sec and restart
the phone.
Read
AT+MVC?
+MVC:
<p1>[,<p2>[,<p3>[,<p4>
[,<p5>]]]]
[,<p5>]]]]
OK
or:
+CME ERROR: <err>
The command will read the current
vocoders values.
vocoders values.
Test
AT+MVC=?
+MVC:
(0-1),(1-5) ,(1-5) ,(1-5)
,(1-5) ,(1-5)
OK
The command shall return the list of
supported
<n>,<p1>,<p2>,<p3>,<p4>,<p5>
values.
supported
<n>,<p1>,<p2>,<p3>,<p4>,<p5>
values.
Table 3-19: +MVC Parameters
<Parameter>
Description
<n>
0
Restore default vocoder configuration.
1
Set vocoders and their priority order.
<p1>,<p2>,<p3>
,<p4>,<p5>
,<p4>,<p5>
1
GSM full rate speech version 1.
2
GSM half rate speech version 1.
3
GSM full rate speech version 2 (EFR).
4
GSM full rate speech version 3 (AMR Full Rate).
5
GSM half rate speech version 3 (AMR Half Rate).