Motorola G24 ユーザーズマニュアル
Chapter 3: AT Commands Reference
December 31, 2007
AT Commands Reference Manual
3-47
+CPAS: 4
OK
AT+CPAS//Voice call active state
+CPAS: 4
OK
+CLCC, List Current Calls
This command displays a list of all current G24 calls and their statuses, and also enables/disables
the unsolicited indication of the call list. (If no calls are received, no information response is sent
to the terminal.)
the unsolicited indication of the call list. (If no calls are received, no information response is sent
to the terminal.)
If the command succeeds but no calls are available, no information response is sent to the
terminal.
terminal.
The maximum number of simultaneous multiparty calls is 5+1 (5 in active group and 1 on hold).
Command
Type
Syntax
Response/Action
Remarks
Set
AT+CLCC=<state>
OK
or:
+CME ERROR: <err>
The Set command enables/disables
unsolicited indications.
unsolicited indications.
Execute
AT+CLCC
+CLCC: <idx>,<dir>,<call
state>, <mode>,
<mpty>[,<number>,<type>,
<alpha>]
<mpty>[,<number>,<type>,
<alpha>]
[<CR><LF>+ CLCC:
<idx>,<dir>,<call state>,
<mode>,<mpty>[,<number>
,<type>,<alpha>]
<mode>,<mpty>[,<number>
,<type>,<alpha>]
[…]]
OK
The
Execute command enables
the receiving of data about
current calls.
current calls.
Read
AT+CLCC?
+CLCC: <state>
OK
or:
+CME ERROR <err>
The Read command returns the call
status.
status.
Test
AT+CLCC=?
+CLCC: (List of supported
<state>s)
OK
or:
+CME ERROR <err>