Motorola G24 ユーザーズマニュアル
![Motorola](https://files.manualsbrain.com/attachments/83de88ba2280e7232128e8931d7cbd2a38dcc654/common/fit/150/50/0293f422c4d32e7e0f777d5e11bc33c83ea5627f71ddf155374c02a23d9a/brand_logo.png)
Audio
3-246
AT Commands Reference Manual
December 31, 2007
+MDMIC, Enable/Disable Microphone Level Setting in Digital Audio
Mode
Mode
This command Enables/Disables the setting of the microphone level in digital audio mode via
+MMICG command.
+MMICG command.
Note:
Do not change +MDMIC settings during an active voice call.
The following table shows the +MDMIC parameters.
+ MMICG, Microphone Gain Value
This command handles the selection of microphone gain values of MIC-handsets (not
MIC-headsets). The new value remains after power cycle. This command affects in digital audio
mode, only when +MDMIC command is used to enable the microphone setting.
MIC-headsets). The new value remains after power cycle. This command affects in digital audio
mode, only when +MDMIC command is used to enable the microphone setting.
Command
Type
Syntax
Response/Action
Remarks
Set
AT+MDMIC=<Mode>
OK
Or:
+CME ERROR: <err>
<Mode> is saved after power down.
Read
AT+MDMIC?
+MDMIC: <mode>
OK
Test
AT+MDMIC=?
+MDMIC: (list of
supported <modes>)
supported <modes>)
OK
Table 3-162: +MDMIC Parameters
<Parameter>
Description
<Mode>
0 - Disables the control of microphone level setting in digital audio mode via
+MMICG. i.e. microphone level setting will not be affected by +MMICG.
This is the default value when +MDMIC set command is never used.
1 - Enables the control of microphone level setting in digital audio mode via
+MMICG. i.e. microphone level setting will be affected by +MMICG.
+MMICG. i.e. microphone level setting will not be affected by +MMICG.
This is the default value when +MDMIC set command is never used.
1 - Enables the control of microphone level setting in digital audio mode via
+MMICG. i.e. microphone level setting will be affected by +MMICG.
Command
Type
Syntax
Response/Action
Remarks
Set
+MMICG=<gain>
OK
+CME ERROR: <err>
The Set command sets the microphone
gain value.
gain value.