Motorola G24 ユーザーズマニュアル
NOP - Compatible
3-422
AT Commands Reference Manual
December 31, 2007
NOP - Compatible
IGNORED (Compatible Only) Commands
The following commands return OK, but do not execute any operation. They are only used to
provide backward compatibility.
provide backward compatibility.
Command
Description
F
Selects the line modulation standard
L
Monitors the speaker loudness
M
Monitors the speaker mode
N
Enables auto mode
P
Selects pulse dialing
T
Selects tone dialing
W
Wait for dial tone
Y
Disconnects on long space
&G
Selects the guard tone
&J
Jack type selection
&L
Leased line operation
&M
Asynch/synch mode connection
&P
Selects pulse dialing
&Q
Communications mode options
&R
Selects the CTC controls
&S
Defines the DSR behavior
&T
Selects tone dialing
\A
Sets the maximum MNP block size
\G
Sets the use of the Xon/Xoff flow control
\J
Adjusts the terminal auto rate
\K
This command is supported for backward compatibility only, and has no effect.
\N
Displays the link type
%C
Enables/disables data compression
\B
Transmits break to remote
\K
Breaks control
+CBAND
Changes band frequencies