Motorola i880 ユーザーズマニュアル

4 Select a code.
5 When you are finished, press 

A under Back to 

return to the MOTOtalk idle screen.

To make a code call:

1 From the MOTOtalk idle screen or the channel 

and code edit screen, press and hold the PTT 
button. Transmit appears on the first line of 
display. Begin speaking after your phone emits 
the MOTOtalk tone.
Note: The MOTOtalk tone consists of 4 rapid 

beeps.

2 Release the PTT button to listen.

If you receive an error message:

• No one is on your channel or code.
• You are out of range.

When you receive a code call, Receive will appear 
on the display. After hearing the MOTOtalk tone, 
you have 6 seconds to reply before the call times 
out.

To reply to the call, press the PTT button.

Note:  An incoming MOTOtalk call can be 

terminated at any time by pressing 

e.

If you set the code to Receive All, your phone can 
receive MOTOtalk transmissions from any phone 
that is set to the same channel, regardless of the 
code (1-15). When you receive transmissions with 
the code set to Receive All, the code that the 
transmission was received on will replace Receive 
All on the display. 

Note: You cannot initiate a code call when the 

code is set to Receive All.

To set the code to Receive All:

1 From the MOTOtalk idle screen, press 

A under 

Edit.

2 Scroll to Code.
3 Press 

A under Edit.

4 Select Receive All.
5 When you are finished, press 

A under Back to 

return to the MOTOtalk idle screen.

To reply to a call with the code set to Receive All: 

Press the PTT button.