Motorola MC70 ユーザーズマニュアル
Accessories 5 - 9
Charging the Spare Battery
Insert a spare battery to begin charging:
1.
Lift the battery release lever.
Figure 5-9
Inserting the Spare Battery
2.
Insert the spare battery in the spare battery charging slot in the cradle with the charging contacts facing up
and to the rear of the cradle.
and to the rear of the cradle.
3.
Release the battery release lever. The battery release lever locks the spare battery into place.
To remove a spare battery, hold back the battery release lever and lift the battery from the spare battery slot.
Figure 5-10
Removing the Spare Battery
Battery Charging Indicators
The Vehicle Cradle charges the EDA’s main battery and a spare battery simultaneously.
The EDA’s charge LED indicates the status of the battery charging in the EDA. See
for
charging status indications.
The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cradle.
See
See
for charging status indications.
The standard battery fully charges in approximately four hours and the extended capacity battery fully charges
in approximately eight hours.
in approximately eight hours.
Extended Capacity
Battery Shown
Battery Shown
Battery Release Lever
Battery Release Lever
Extended Capacity
Battery Shown
Battery Shown