Motorola MC70 ユーザーズマニュアル
Accessories5 - 15
TRG7000 Trigger Handle
The TRG7000 Trigger Handle pistol grip accessory adds a gun-style handle with a scanning trigger to the EDA.
It increases comfort when using the EDA in scan-intensive applications for extended periods of time. The
TRG7000 is intended for use with MC70 WLAN/PAN configurations.
It increases comfort when using the EDA in scan-intensive applications for extended periods of time. The
TRG7000 is intended for use with MC70 WLAN/PAN configurations.
Install the cleat onto the EDA before using the trigger handle. For cleat installation and communication setup
procedures refer to the MC70 Integrator Guide.
procedures refer to the MC70 Integrator Guide.
Inserting the EDA into the Trigger Handle
Slide the EDA into the Trigger Handle until it locks in place. The release secures the EDA to the Trigger
Handle.
Handle.
Figure 5-15
Inserting the EDA into the Trigger Handle
Removing the EDA
To remove the EDA, press the release down and pull the EDA forward.
Figure 5-16
Removing the EDA
Release
Release