Motorola MicroTAC ユーザーズマニュアル

The Nickel Metal Hydride or Nickel-Cadmium battery 
supplied with your phone must be fully charged before 
placing your phone into service. The batteries are shipped 
from the factory in a discharged state in order to extend the 
life of the battery. It is recommended that you charge new 
batteries for at least 4 hours using the AC Charger/
Transformer, or overnight using the 

IntelliCharge



 Desktop 

Charger. Do not charge the battery longer than 24 hours. 
(Refer to page 3 if you are using a plug-in charger.)

Motorola desktop chargers for the 

MicroTAC line of 

products are dual pocket chargers. The charger’s front 
pocket can charge a battery while attached to the phone or 
by itself. The charger’s rear pocket can charge any 
compatible battery (not attached to a phone). 

Battery may explode if exposed to fire. 

WARNING  

To prevent injuries or burns, and to avoid 

damage to the battery, do not allow metal objects to 
contact or short circuit the battery terminals. Refer to 
“Batteries” on page vii for details.
CAUTION  

Charging your battery in anything other than 

a Motorola charger will void your warranty.
CAUTION  

To avoid damage to the battery, do not place 

it anywhere that might cause the battery terminals to short 
together.

AC Charger/Transformer

IntelliCharge Desktop Charger

MicroTAC_Book  Page 1  Thursday, October 16, 1997  1:30 PM

Black spot 45.0

°

 169.71 LPI