Motorola MicroTAC ユーザーズマニュアル
Placing Calls From Memory
15
About Recalling from Memory
Phone numbers stored in memory can be recalled in any
of three ways:
of three ways:
• By entering a two-digit location number
• By scrolling using the Memory Location Numbers
• By pressing any of the One Touch Dialing Keys
• By scrolling using the Memory Location Numbers
• By pressing any of the One Touch Dialing Keys
(described in “One Touch Dialing Keys” on
page 17)
page 17)
Using any of these methods, once a phone number is
displayed, you may place a call to that number by pressing
displayed, you may place a call to that number by pressing
.
NOTE
You may also scroll through the memory locations
while in a call (for instance, if you want to look up a phone
number to pass along to the other party). When finished,
press
number to pass along to the other party). When finished,
press
. This will cancel scrolling, but will not end your
current call.
Placing Calls by Entering Two-Digit
Number
Number
1. Press .
2. Enter the desired two-digit location number. The
2. Enter the desired two-digit location number. The
display shows the location number, then the last 10
digits of the stored phone number. Press
digits of the stored phone number. Press
again to
view the complete number.
3. Press
to place a call to the number stored at the
two-digit memory location.
SND
END
RCL
RCL
SND
MicroTAC_Book Page 15 Thursday, October 16, 1997 1:30 PM
Black spot 45.0
°
169.71 LPI