Motorola KEM-ML36901 プリント

3 = High Sensitivity for quiet environments
2 = Medium Sensitivity for most environments
1 = Low Sensitivity for noisy environments

Note: When you connect a headset, the radio is automatically set to the
last chosen sensitivity level.

The Q

T

noise-filtering feature helps to ensure uninterrupted

communication with other Motorola radios that have this feature.
This feature also filters out unwanted transmissions from other
radios. This is useful in places where there is heavy radio traffic,
such as amusement parks or ski resorts.
Note:  Q

T

noise filtering is not available when the radio is scanning.

1.  Press

until

displays. The current setting On/Off will flash.

2.  Press

or

to turn noise filtering On or Off.

3.  Press

to confirm your selection or

to continue set up.

1.  Select the same channel and Interference Eliminator Code as

the other radio.

2.  Press

and speak normally.

Note: For a 30-second period, starting after the last transmission, all
transmissions received on the selected channel and code will pass
through the Q

T

noise filter.

VibraCall

TM

is a vibrating alert that notifies you that your radio is

receiving a message. This is useful in noisy environments. When the
alert is on, the radio vibrates once every 30 seconds when you receive a
message on the channel and code you set.

1. To turn vibrating alerts on, press

until

   

is displayed. The 

current setting will flash.

2.  Press

or

to change the setting to On/Off.

3.  Press

to set or

to continue set up. 

Keypad Tones
You may enable or disable the speaker key tones. You will hear the key
tone each time a button is pushed.

1.  Press

until

appears. The current setting On/Off will flash.

2.  Press either

or

to turn On or Off.

3.  Press

to confirm or

to continue set up.

Note: When the key tone feature is off, the following are not disabled:

• 

Transmit timeout alert tone

• 

Call tone

• 

Low battery alert tone or

• 

The transmitted talk confirmation tone

Transmitting a Talk Confirmation Tone
You can set your radio to transmit a unique tone when you finish
transmitting. It is like saying “Roger” or “Over” to let others know you
are finished talking.

1.  With the radio on, press

until the

appears. The current setting

On/Off flashes.

2.  Press

or

to turn On or Off.

3.  Press

to set or

to quit menu mode.

Dual Watch Scan
This feature allows you to monitor two channels at the same time.

1. Press the

button until the Dual Channel Scan icon

displays.

2.

Press the

or

buttons to select the second channel for Dual Watch

reception. (if you want to disable the Dual Watch function, set it to ‘OFF’).

3. Press

or the PTT button to confirm the channel selection.

When the Dual Watch feature is activated, the radio will switch
sequentially between the primary and the Dual Watch channels.

The active channel will display for five (5) seconds after any activity has
ended on the dual channel. You may talk on the Dual Watch channel
during this period. 

BLUETOOTH®   Pairing
The MU series BLUETOOTH® radio works with any qualified
BLUETOOTH® headsets from BLUETOOTH® SIG, Inc. and with the
Talkabout® Wireless BLUETOOTH® PTT POD - 1693.

Note: To avoid paring to the wrong device, please switch off all
other Bluetooth devices before pairing process. 

1. With the radio on, briefly press

until

appears on the LCD. The

current setting On/Off will flash.

2.  Press either the

or the

to select On.

3.  Press the PTT button to confirm the selection.

The BLUETOOTH

of the radio is now in standby (connectable) mode.

1.

With the MU350 BLUETOOTH

enabled, press and hold the - button

for about three seconds to enter pairing mode. A tone will sound and
the BLUETHOOTH

blue LED indicator on the radio will flash quickly. 

2.  Follow the BLUETOOTH

headset manufacturer's instruction to

enable its BLUETOOTH

function and entry to paring mode.

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

3.  Successful pairing will be indicated on the MU350 radio by a tone

and a brief flashing of the BLUETOOTH

LED indicator to confirm

entry to connected mode. 

4.  With the MU350 BLUETOOTH

enabled, press and hold the

button for about three seconds to enter pairing mode. A tone will
sound and the BLUETOOTH

blue LED indicator on the radio will

flash.

1.  Enable the MU350 Series Radio’s Bluetooth functionality (see above)

2.  Ensure the PTT Pod is off.

3.  Press and hold the power on/off button until the PTT Pod LED

indicator light flashes blue and red alternatively.

4.  With the MU350 Series Radio BLUETOOTH

enabled, press and hold

the

button for about three seconds to enter pairing mode. A tone

will sound and the BLUETOOTH

blue LED indicator on the radio will

flash.

5.  Successful pairing will be indicated by a tone and brief flashing of

the BLUETOOTH

LED indicator to confirm entry to connected mode.

6.  If pairing was successful, the BLUETOOTH

LED indicator of the

radio will flash blue at 5 second intervals.

7.  If pairing fails, turn the PTT Pod and the MU350 Series Radio off and

repeat the above process.

After successful pairing, you can talk and listen via the paired
BLUETOOTH

headset and/or use the PTT Pod to activate the PTT

function on the MU350 series radio. 

Note: You must press and hold 

on the radio to transmit when only a

headset is paired (to enable the wireless PTT function, the MU350 series
radio also needs to be paired with the Bluetooth PTT POD model 1693).

1.  With the radio on, short press

until

appears. The current

setting On/Off will flash.

2.  Press

or

to select Off.

3.  Press

to set or

to continue set up. The BLUETOOTH

LED

indicator will stop flashing. 

Note: The PTT Pod is an optional accessory which is sold separately

Emergency Alert Mode
The Emergency Alert feature can be used to signal members in your
group if you need urgent help. The MU Series radios will operate in an
automatic “hands-free” emergency control mode for a total of 30
seconds after activating the Emergency Alert. The MU Series radios in
your group will automatically advance the speaker volume to the
maximum setting and sound a warbling alert tone for 8 seconds. The alert
tone is emitted from your own radio speaker and the receiving radios in
your group. After the 8 second alert, any spoken words or incidental
sounds at your end will be transmitted to the group for 22 seconds. For
the 30 second duration of Emergency Alert mode, the MU Series radio
controls and buttons will be locked to maximize reception of the
emergency message. 

1.  Press and hold the Emergency Alert button

for three seconds.

2.  Release the button after the LED Indicator glows red and the alert tone

begins to sound. There is no need to continue to hold the Emergency
Alert button or use PTT for your message to be transmitted.

3.  After the alert tone ends you may speak into the microphone. Your

voice or incidental sounds will be transmitted. The LED indicator will
continue to glow for the duration of the 22 second period.

4.  After 30 seconds your radio speaker will emit a Talk Confirmation

Tone and the LED Indicator will extinguish. Operation then returns to
normal two-way mode.

Note: All Motorola Talkabout EM, MJ, MR, MT and MU Series radios are
fully compatible with the Emergency Alert feature. Radios other than EM,
MJ, MR, MT and MU Series can receive the emergency alert signal, but
will not respond with adjusted volume settings, locked controls, or a
warbling alert tone. Users of other radio models set to the same channel
and Interference Eliminator Code will hear a steady tone for eight seconds
followed by the voice transmission for 22 seconds.
Warning: The Emergency Alert feature should only be used in the event
of an actual emergency. Motorola is not responsible if there is no
response to the emergency alert from the receiving group.

Built-in Flashlight
Press and hold the flashlight button to turn and keep the light on. The
switch functions as a momentary control for the light.

Note:  Turn off the flashlight when not in use to conserve battery power.

To avoid accidentally changing your radio settings:
1.  Press and hold

until

displays.

2.  When in lock mode, you can turn the radio on and off, adjust the

volume, receive, transmit, send a call tone, and monitor channels. All
other functions are locked.

To unlock the radio, press and hold

until

is no longer displayed.

Scanning Channels
Use scan to search the 22 channels for transmissions from unknown
parties, to find someone in your group who has accidentally changed
channels, or to quickly find unused channels for your own use.

There is a priority feature and 2 modes of scanning ( basic and
advanced ) to make your search more effective. The basic scan mode

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

uses the channel and code combinations for each of the 22 channels as
you have set them ( or with the default code value of 1). The “Advanced
Scan” mode will scan all channels for any and all codes, detect any
code in use, and use that code value temporarily for that channel.

Priority is given to the “home channel,” that is, the channel (and
Interference Eliminator Code) your radio is set to when you start the scan.
This means the initial channel (and code setting) is scanned more often
than the other 21 channels, and your radio will respond quickly to any
activity occurring on the home channel as a priority.

To start Scanning:
1.  Briefly press the

key. The scan

will appear in the display, and the

radio will begin to scroll through the channel and code combinations.

2.  When the radio detects channel activity matching the channel and

code combination, it stops scrolling and you can hear the transmission.

3.  To respond and talk to the person transmitting, press

within five

seconds after the end of the transmission.

4.  The radio will resume scrolling through the channels five seconds

after the end of any received activity.

5.  To stop scanning, briefly press the

key.

To start Advanced Scanning:
1.  Set the Interference Eliminator Code to “zero” or OFF.

2.  Briefly press the

key. The scan

will appear in the display, and

the radio will begin to scroll through the channels. No Interference
Eliminator Codes will filter what is heard.

3.  When the radio detects channel activity with ANY code (or NO

code), it stops scrolling and you can hear the transmission. Any
Interference Eliminator Code that may be in use by that party will be
detected and displayed.

4.  To respond and talk to the person transmitting, press

within five

seconds of the end of the transmission. The radio will transmit using
the newly detected Interference Eliminator Code.

5.  The radio will resume scrolling through the channels five seconds

after the end of any received activity.

6.  To stop scanning, briefly press the

key.

Scanning Notes:
1.  If you press

while the radio is scrolling through inactive channels,

the transmission will be on the “home channel”. Scanning will
resume five seconds after the end of your transmission. You may
press the

key to stop scanning at any time.

2.  If the radio stops on an undesired transmission, you may immediately

resume the scan by briefly pressing

or

.

3.  If the radio repeatedly stops on an undesired transmission, you may

temporarily remove that channel from the scan list by pressing and
holding

or

for three seconds. You may remove more than one

channel in this way.

4.  To restore the removed channel(s) to the scan list, turn the radio off

and then back on, or exit and re-enter the scanning mode by
pressing

.

5.  You cannot remove the home channel from the scan list.

6.  In Advanced Scan, the detected code will only be used for one

transmission. You must note the code, exit scan, and set that
detected code on that channel to permanently use the detected code.

Your radio can tune in to broadcasts by the United States National Oceanic
and Atmospheric Administration (NOAA) Weather Radio.
You can listen to a weather channel (see “Weather Channels and
Frequencies” table for details) or set your radio to alert you to emergency
weather broadcasts that interrupt routine broadcasts. When you listen to a
weather channel, you cannot use your radio in scan mode or for two-way
communications.

NOAA has transmitters located throughout the United States. These
transmitters broadcast watches, forecasts, and other information 24 hours 
a day.
Note:  NOAA weather radio stations are assigned to cover specific areas
and service may be limited. Please check with your local weather office for
frequency and details, or visit www.weather.gov/nwr in the US to view the
appropriate transmitter for your area.

The use of the NOAA logo does not provide an endorsement or implied
endorsement by NOAA’s National Weather Service.

Turning Weather Channel Reception On and Off
1.  To turn weather reception on, press

and hold for 3 seconds.

2.  To turn off, press

or turn the radio off and then back on.

Setting the Weather Channel
Your radio receives weather frequencies:
1. After turning weather reception on, press

. The current 

channel flashes.

2.  Press

or

to select the appropriate channel with good

reception in your area.

3.  Press

to save the weather channel setting.

Setting the Weather Alert
Your radio can be set to respond to NOAA Weather Radio emergency
messages. A special alarm tone sounds an alert and turns on the
weather receiver to give you immediate weather and emergency
information.

1.  After turning weather reception on, press

twice. On/Off displays.

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

Products and Accessories as
defined above, unless
otherwise provided for below.

One ( 1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.

1.  Ninety ( 90) days from the

date of purchase by the first
consumer purchaser of the
product.

2

days from the date returned
to the consumer, whichever
is longer.

Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are excluded
from coverage. 

Batteries. Only batteries whose fully charged capacity falls below
80% of their rated capacity and batteries that leak are covered by
this limited warranty.

Abuse & Misuse. Defects or damage that result from: (a) improper
operation, storage, misuse or abuse, accident or neglect, such as
physical damage (cracks, scratches, etc.) to the surface of the product
resulting from misuse; (b) contact with liquid, water, rain, extreme
humidity, heavy perspiration, when the battery door or accessory port
seals are not closed, sand, dirt or the like, extreme heat, or food; (c)
use of the Products or Accessories for commercial purposes or
subjecting the Product or Accessory to abnormal usage or conditions;
or (d) other acts which are not the fault of Motorola Solutions, Inc.  or
Giant International Ltd., are excluded from coverage.

Use of Non-Motorola branded Products and Accessories. Defects
or damage that result from the use of Non-Motorola branded or
certified Products or Accessories or other peripheral equipment
are excluded from coverage.

Unauthorized Service or Modification. Defects or damages
resulting from service, testing, adjustment, installation,
maintenance, alteration, or modification in any way by someone
other than Motorola Solutions, Inc, Giant International Ltd. or its
authorized service centers, are excluded from coverage.

Altered Products. Products or Accessories with (a) serial numbers
or date tags that have been removed, altered or obliterated; (b)
broken seals or that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or non-Motorola
branded housings, or parts, are excluded from coverage.

Communication Services. Defects, damages, or the failure of
Products or Accessories due to any communication service or
signal you may subscribe to or use with the Products or
Accessories is excluded from coverage.

What Does this Warranty Cover?
Subject to the exclusions contained to the right, Giant International
Ltd. warrants the Motorola branded consumer two-way radios that
operate via Family Radio Service or General Mobile Radio Service
that it manufactures (“Products”), the Motorola branded or certified
accessories sold for use with these Products that it manufactures
(“Accessories”) to be free from defects in materials and
workmanship under normal consumer usage for the period(s)
outlined below. This limited warranty is a consumer’s exclusive
remedy, and applies as follows to new Motorola branded Products
and Accessories manufactured by Giant International Ltd., and
purchased by consumers in the United States, which are
accompanied by this written warranty:

Who is covered?
This warranty extends only to the first consumer purchaser, and is not
transferable. It covers use by consumers for recreational use only.

What will GIANT INTERNATIONAL LTD. do?
GIANT INTERNATIONAL LTD., at its option, will at no charge repair,
replace or refund the purchase price of any Products or
Accessories that does not conform to this warranty. We may use
functionally equivalent reconditioned/ refurbished/ pre-owned or
new Products, Accessories or parts.

What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
MOTOROLA SOLUTIONS, INC. OR GIANT INTERNATIONAL LTD. BE
LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE
OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY
KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS,
LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT
OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE
THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.

Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation on
the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights that vary from state
to state or from one jurisdiction to another.

Manufactured, distributed or sold by Giant International Ltd., official
licensee for this product. MOTOROLA, MOTOROLA SOLUTIONS and
the Stylized M Logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC and are used under license. All
other trademarks are the property of their respective owners.
©2013 Motorola Solutions, Inc. All rights reserved.

MU Series

WX1

162.550 MHz

WX7

162.525 MHz

WX2

162.400 MHz

WX8

161.650 MHz

WX3

162.475 MHz

WX9

161.775 MHz

WX4

162.425 MHz

WX10

161.750 MHz

WX5

162.450 MHz

WX11

162.000 MHz

WX6

162.500 MHz

How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:

For Accessories, please call the telephone number designated
above for the product with which they are used.

You will receive instructions on how to ship the Products or
Accessories at your expense, to a GIANT INTERNATIONAL LTD.
Authorized Repair Center. To obtain service, you must include: (a) a
copy of your receipt, bill of sale or other comparable proof of
purchase; (b) a written description of the problem; (c) the name of
your service provider, if applicable; (d) the name and location of the
installation facility (if applicable) and, most importantly; (e) your
address and telephone number.

2.  Press

or

to select On/Off. If you activate Weather Alert and

return to two-way mode,

will display.

3.  Press

to save the Weather Alert setting.

4.  Press

to return to two-way mode.

As with two-way radio reception, weather channel reception depends on
how close you are to a transmitter and whether you are indoors or
outdoors. Because weather channels are transmitted without codes, they
may contain static or noise. Weather Alert will not function while actively
transmitting or receiving in two-way mode.

Scanning for Weather Channel
The radio can scan for an active NOAA transmission automatically.

1.  After turning weather reception on, briefly press the

key.

2.  The scan icon

will appear in the display, and the channel will

scroll through the NOAA channels 1-7.

3.  When the radio detects channel activity, it stops scanning and you

can hear the transmission.

4.  You may resume the scan by briefly pressing

or

. 

5.  To stop scanning, briefly press the

key. The scan icon

will

disappear. 

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013

GIANT TELECOM LIMITED

Customer: GI
Model Number: MU350
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R01
Date: Jan 04, 2013