Motorola DTR410 ユーザーズマニュアル

1. INSTALL THE BATTERY

Slide the lock tab to the left to unlock and push down on the 
latch at the top of the battery door and lift off the radio. Insert 
the battery, printed arrows first, into the battery compartment 
and press down to secure in place. Replace the battery door.

2. CHARGE THE BATTERY

Connect the charger to the drop-in charging tray and insert 
the radio using the plug of the plug in charger. The battery 
meter on the radio display will stop flashing when fully 
charged.

3. TURN THE RADIO ON

Press the Power Button (hold to turn off).The radio chirps.

NOTE:Batteries are shipped uncharged from the factory. Always charge a new 

battery to capacity before initial use, charge time is dependent upon 
charger type.

1. Turn the radio on and select the recipient(s) by either:

• Selecting from the scroll list, using the navigation keys
• Selecting from Contacts by pressing Menu and using the navigation keys
• Selecting from Recent Calls by pressing Menu then selecting Recent Calls

2. Press and hold the PTT button on the side of the radio 

until the talk permit tone is received, then speak clearly 
into the microphone. If “User Not Available” displays, the 
recipient is either in another radio call, out of range, or 
turned off. Try to connect again. When making a group 
call, at least one member of the group must be available.

3. Release the PTT button to listen.

1. Turn radio on and set volume level.

2. Switch to desired Public Group using the navigation keys

3. When a Private, private Group, or Group call is received, it will be heard at 

the volume level you have set. Press the PTT to respond.

MAN WITH RADIO

MOTOROLA, the Sylized M Logo, are registered in the 
U.S. Patent and Trademark Office. All other product or 
service names are the property of their respective 
owners. 
©Motorola, Inc. 2008. All rights reserved. 
Printed in U.S.A.

*5480384S84*

5480384S84-B