Motorola 031431a ユーザーズマニュアル
160 - Troubleshooting
I plugged the
data cable into
my handset but
my handset did
not beep. How
do I know if the
data cable is
ready to go?
The beep indicates that you are set
up correctly. If you did not hear a
beep, make sure that both ends of
the data cable are connected—the
smaller end to your handset and the
larger end to your computer.
Finally, your computer may have
Finally, your computer may have
deactivated the port to save power.
Try opening an application that uses
activate the port.
My handset
beeped when I
attached the
data cable, but
my data
applications
don’t work.
Some wireless networks may not
support data transmission. If you are
roaming on an unfamiliar network,
this may be the case.
Also, remember that data
Also, remember that data
transmission usually requires a
subscription. Call 3 for more
information.
When sending
data with the
data cable, why
does the
computer show
a connection
rate of 19200
Kbps?
19200 Kbps is the data transfer rate
of the connection between your
computer and the handset in a
standard CSD (Circuit Switch Data)
connection. The rate of the
connection between your handset
and the network is displayed on your
handset, and will be either 14400 or
9600 Kbps.
A GPRS connection may have a
A GPRS connection may have a
higher data transfer rate.
Problem
Solution