Panasonic 700 ユーザーガイド

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  4-93

2. Press 

the 

CONF key.

“C” appears in the display.

3. Press 

AUTO.

4.  Press a System Speed Dial key.

The programmed data appears on the display.

5. Press 

the 

ON/OFF key.

• The ON/OFF LED goes off.

• The date and time appear on the display.

• FF1 (System): Speed Dial Mode Setting (CPC-AII and CPC-B Version 7.0 

and higher)

• FF1 (System): Override Toll Restriction With SSD Numbers

• FF10 (Speed Dialing): System Speed Dialing

• If numbers do not appear on the display when you use System Speed Dial 

codes (00-89 or 000-199), your extension is not programmed to display 
that data.

• The system can be programmed to allow System Speed Dial Numbers to 

override toll restrictions. 

• You can make outside calls using this feature, even if your extension is 

assigned toll restriction type 2-6.

• Speed Dial code cannot be checked while Station Lockout is activated.

• With CPC-AII and CPC-B Version 7.0 and higher, if the Speed Dial is 

used to forward to an outside number and Least Cost Routing is enabled, 
the Speed Dial cannot use Trunk Access “9.” Use trunk access 81-86 
instead.