Polycom H340 ユーザーズマニュアル
SpectraLink Corporation
Configuration and Administration–NetLink e340/h340/ i640 Wireless Telephone
NetLink Telephony Gateway and SpectraLink Radio Protocol
PN: 72-1065-09-J.doc
Page 26
4. License Management
The NetLink Wireless Telephone system supports a number of different IP protocol
integrations. All NetLink e340, h340, and i640 Wireless Telephones are shipped
from SpectraLink with a generic software load that allows them to associate to a
wireless LAN and download their functional software from a TFTP server. The
handsets may not function properly without downloading appropriate
software.
The following details the process to properly configure handsets and download
software via over-the-air file transfer.
integrations. All NetLink e340, h340, and i640 Wireless Telephones are shipped
from SpectraLink with a generic software load that allows them to associate to a
wireless LAN and download their functional software from a TFTP server. The
handsets may not function properly without downloading appropriate
software.
The following details the process to properly configure handsets and download
software via over-the-air file transfer.
4.1 Requirements
• A wireless LAN must be properly configured and operational through the use of
802.11b wireless access points.
• NetLink Telephony Gateway must also be connected to your network and
completely operational, and the handset must be registered to it.
• The NetLink Telephony Gateways have a TFTP server and must be available on
the network in order to load the appropriate software into the handsets. Most
installations choose to take advantage of the TFTP server that accompanies the
NetLink Telephony Gateway, making a separate TFTP server unnecessary.
installations choose to take advantage of the TFTP server that accompanies the
NetLink Telephony Gateway, making a separate TFTP server unnecessary.
• Finally, ensure that the Battery Pack on the handset is fully charged.