Polycom VVX 500 ユーザーズマニュアル

ページ / 119
Polycom VVX 500 Business Media Phone User Guide 
54 
 
When you attach a USB flash drive to your phone, a USB icon, 
, scrolls in the status bar, together 
with a message that tells you how much recording time is available on the USB flash drive. 
You can’t record when: 
 
There are no connected calls on your phone. 
 
You place a new call to transfer a call or set up a conference. 
 
The phone prompts you to answer an incoming call. 
If you hold a call, recording pauses. Recording continues if the called party places you on hold. Recording 
stops if all active calls end, no matter who ends the calls.  
If you press
while recording, only the called parties are recorded. 
Tones and indications, such as the dialing of digits or ringing from another party’s phone, that occur 
before a call connects are not recorded. Local tones and indications, such as DTMF tones when dialing, 
are not recorded. However, tones from another party’s phone may be recorded. 
You control recording by tapping StartPauseResume, and Stop. All active calls that occur on your 
phone between the time you tap Start and Stop are recorded, alternating in the same .wav file. 
For example, on October 4, 2007 at 11:22 A.M., you place a call to party A. After party A answers, you 
start recording the call. While you speak with party A, an incoming call arrives. You hold party A and 
speak with party B. When you finish speaking with party B, you return to speaking with party A. While 
speaking with party A again, another incoming call arrives. You hold party A and speak with party C. 
When you finish speaking with party C, you return to speaking with party A. You end your call with party 
A, and recording stops. 
Your conversations with parties A, B, and C are all recorded in the same .wav file as follows: