Viewsonic VE710b/VE710s ユーザーズマニュアル

• Plug another electrical device (like a radio) into the power outlet to verify that 

the outlet is supplying proper voltage.

• Make sure the video cable supplied with the 

LCD dislay is tightly secured to 

the video output port on the back of the computer. If the other end of the 
video cable is not attached permanently to the 

LCD dislay, tightly secure it to 

the

LCD dislay.

• Adjust brightness and contrast.
• If you are using an Macintosh older than G3, you need a Macintosh adapter.

• If any colors (red, green, or blue) are missing, check the video cable to make

sure it is securely connected. Loose or broken pins in the cable connector 
could cause an improper connection.

• Connect the 

LCD dislay to another computer.

• If you have an older graphics card, contact ViewSonic

®

 for a non-DDC 

adapter.

• Press only one button at a time.

• Make sure power button (or switch) is ON. 
• Make sure A/C power cord is securely connected to the 

LCD dislay.

ViewSonic        VE710b_VE710s

16