Precor 776i ユーザーズマニュアル

 

 

The equipment can display user prompts, text, and user entries in 
several different languages. When the equipment is shipped from 
the factory, it is set to display English. 

Note: Programming prompts are not affected by language 
selection. The prompts in this section continue to appear in 
English. 

1. 

2. 

1. 

2. 

At the 

 prompt, press OK. Use the 

navigational arrow keys to choose a language. 

When you are ready, press OK to accept the displayed setting 
and move to the next feature. For other options, refer to the table 
in Accessing Club Programming Mode and Changing the 
Settings. 

 

The equipment can display measurements in either Metric or U.S. 
Standard. The default factory setting is to display U.S. Standard. To 
change this setting, perform the following steps: 

At the 

 prompt, press OK. Use the navigational 

arrow keys to select a unit of measure (

 or 

). 

CAUTION: If you change the Unit of Measure display on a 
treadmill, be sure to check the speed setting to verify that it is 
correct. Refer to Treadmill: Determining the Club Speed 
Limit. 

When you are ready, press OK to accept the displayed setting 
and move to the next feature. For other options, refer to the table 
in Accessing Club Programming Mode and Changing the 
Settings. 

20