Bebe Sounds #BR140 ユーザーズマニュアル
CARE AND CLEANING
1. Separate the suction portion of the aspirator
from the base by gently pulling them apart
(See Fig 7).
from the base by gently pulling them apart
(See Fig 7).
Figure 7
2. Unscrew collection cup by turning it to the left
(counterclockwise).
3. Remove white rubber ring located where
(counterclockwise).
3. Remove white rubber ring located where
collection cup screws in.
4. Remove silicone tip.
5. Wash all 4 parts in warm soapy water or
5. Wash all 4 parts in warm soapy water or
in the dishwasher (top shelf only) after each use.
6. Dry all parts thoroughly before using again or
assembling.
7. Clean the base with a soft dry or slightly damp
cloth.
NOTE: The base of the aspirator should never be
submerged in water or any other liquid. Never put
it in the dishwasher.
submerged in water or any other liquid. Never put
it in the dishwasher.
4. Press the POWER
button and allow the
suction to clear the mucus.
NOTE: You may not think it is working because
the mucus may not immediately appear in the col-
lection cup. However, when you take it apart you
will see how well it is working.
the mucus may not immediately appear in the col-
lection cup. However, when you take it apart you
will see how well it is working.
Figure 6
5. Release the POWER button and remove from
nostril.
6. Repeat in other nostril and as needed.
7. Clean thoroughly as instructed below.
nostril.
6. Repeat in other nostril and as needed.
7. Clean thoroughly as instructed below.
8
9
Figure 5
CURRENT aspirator manual.indd 8-9
CURRENT aspirator manual.indd 8-9
4/18/06 12:17:06 PM
4/18/06 12:17:06 PM