Belgacom 310 ユーザーズマニュアル

Doc Ref: DM-868 Rev: 1

 

 

 

 
 

 
13 

 

The system can be programmed so that incoming calls ring different extensions or 
groups of extensions at different times of the day, e.g. after hours, all calls ring a 

night service extension.  These changeovers will take place automatically but can 
be overridden by an extension that has 

Day/Night Changeover enabled in 

system programming.  Normally only the system administrator or reception 
extension would have this facility programmed. 
 

Note:  At installation, Extension 11 is automatically set as the default 
administration phone and 

Day/Night Changeover will be enabled.  

 

 

 

 

Calls made from an extension are subject to the level of access that has been 
assigned to the user of that extension.  The level of access defines the types of call 
the user is permitted to make, i.e. internal calls only, internal and external local 

calls only etc.  The Roaming PIN feature allows a user to enter a PIN code at 
another extension where that telephone will take on their user profile for a time.   

Individual extensions need to be enabled in system programming to be able to 
accept a Roaming PIN.  The system installer/administer will issue Roaming PIN and 

user numbers. 

 
 

 

 

To deactivate Roaming PIN press 

#68# 

 
Unsuccessful log in to Roaming PIN  

 
Each Roaming PIN user is allowed three attempts to enter the log-in information 

correctly after which the user number will be disabled for one hour.  During this 
time the Roaming PIN will not be usable at any extension. 

 

 

Dial 

79, on receipt of busy tone from the 

called extension, to intrude. 

Dial 

*072# from a designated extension to 

switch to night ringing mode, *071# to go 

to day ringing mode. 

Dial *68*01*xxxx# to get roaming PIN access, as 
user 01, with PIN XXXX