Invacare 218-18 inch 222-22 inch ユーザーズマニュアル



Damaged grab bars may not adhere to the wall properly.
• DO NOT install grab bars if damage is found. 
Grab bars may not get adequate suction to adhere to the wall.
• DO NOT install grab bars directly onto grout lines or gaps in the wall surface. 
• DO NOT install grab bars onto dirty or wet walls.

1.

Clean and dry the grab bar. 

on page 4. 

2.

Clean and dry the wall.

3.

Position the grab bar so that 

it is not overlapping any 

grout lines or gaps in the 

wall surface.

4.

Lift the lever (A) on each 

end of the grab bar (B) until 

the window (C) turns RED.

5.

Press the grab bar against the wall. 

6.

Look at the window (1). Perform one of the following:
•

The window turns GREEN - The grab bar is properly 

secured to the wall. Push the levers all the way down (2).

•

The window turns RED - Reposition the grab bar on the 

wall, ensuring that the grab bar is not overlapping any grout 

lines or gaps in the wall surface, and repeat STEPS 5 and 6.

7.

Check that the grab bar is 

secured to the wall before 

use.

C

A

B

1

2