Sharp DK-CL8PH(BK) ユーザーズマニュアル
13
2011 October 4
DK-CL8PH ENAUS_A6_p01-p20.fm
DK-CL8PH(BK)
DK-CL8PH(GR)
DK-CL8PH(PK)
DK-CL8PH(GR)
DK-CL8PH(PK)
Radio
Listening to the radio
■ Tuning
Notes:
●
When radio interference occurs, auto scan tuning may stop
automatically at that point.
automatically at that point.
●
Auto tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING (
or
) button
again.
●
This product can receive FM Stereo amd FM Monaural broadcast.
■ Programming a station
You can store 40 FM stations in memory.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNC. button repeatedly to select the Tuner
function.
3
Tune to the desired station.
Manual tuning:
Press the TUNING (
Press the TUNING (
or
) button to tune into the
desired station.
Auto tuning:
When the TUNING (
When the TUNING (
or
) button is pressed for more
than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
tuner will stop at the first receivable broadcast station.
TUNING
ALARM
RESET
RESET
ON/STAND-BY
1
Perform steps 1 - 3 “Tuning” on page 13.
2
Press the CLOCK/MEM. button for more than 2
seconds to enter the preset tuning saving mode.
3
Within 30 seconds, press the
or
button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 30 seconds, press the CLOCK/MEM. button to
store that station in memory.
If the preset number indicators disappear before the
station is programmed, repeat the operation from step 2.
station is programmed, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change
a preset station.
When a new station is stored in memory, the station
previously programmed for that preset channel number
will be erased.
When a new station is stored in memory, the station
previously programmed for that preset channel number
will be erased.
MON
MON
MON